Drawbot controller

tuckbick·drawbot·drawbot_controller/drawbot_controller.kicad_pcb

Drawbot controller PCB layout, top view — open source ESP32 board by tuckbick

About the Drawbot controller PCB

Drawbot controller is an open source ESP32 PCB design by tuckbick, published on GitHub. It is a 2-layer board measuring 159.2 × 94.1 mm, with 36 components from 24 distinct parts.

Its main chip is the ESP32, from the ESP32 family. By type, the board carries 10 capacitors, 8 resistors, 5 connectors, 3 transformers and 1 diode.

It belongs with the robotics & motion, power & battery and iot & wireless designs in this gallery.

From the project

re-imagining my pen plotter / cnc controller

DrawBot is a custom, ESP32-based controller board and large-format CoreXY pen plotter.

This project was built to scale up the traditional desktop plotter experience. By moving to a custom ESP32 PCB running FluidNC, this iteration eliminates the need for multiple microcontrollers and messy wiring, wrapping WiFi control, SD card hosting, and heavy-duty motor driving into one clean package.

Drawbot controller bill of materials (BOM)

36 components, 24 distinct parts.

QtyPartRefs
1
Motor Power
J1
1
Laser Power
J2
1
System Power
J3
1
OLED Display
J4
1
E Stop
J5
1
MP1584
B1
1
ESP32
E1
1
X-Axis
N1
1
Y-Axis
N2
1
Z-Axis
N3
1
Laser Power
N4
1
Toolhead Signal
N5
1
UART
N6
1
Micro SD Card Module
SD1
1
X-Axis
T1
1
Y-Axis
T2
1
Z-Axis
T3
1
1N5822
D1
1
1000uF 50v
C1
1
470uF 16v
C2
Show 4 more
QtyPartRefs
5
220uF 50V
C3, C4, C5, C6, C7
2
0.1uF
C8, C9
1
47uF 10v
C10
8
10k
R1, R2, R3, R4, R5, R6, R7, R8

Drawbot controller design files

The KiCad project lives in the tuckbick/drawbot repository on GitHub; these links point at the commit this page was built from.

Drawbot controller: common questions

What microcontroller does the Drawbot controller use?

The Drawbot controller is built around the ESP32, from the ESP32 family.

How big is the Drawbot controller PCB?

The Drawbot controller measures 159.2 × 94.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Drawbot controller?

36 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Drawbot controller design files?

From the tuckbick/drawbot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Drawbot controller design in my own project?

The repository has no license, so all rights stay with tuckbick. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Drawbot controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in drawbot

Similar boards