Drawbot frame hub
tuckbick·drawbot·drawbot_frame_hub/drawbot_frame_hub.kicad_pcb
About the Drawbot frame hub PCB
Drawbot frame hub is an open source PCB design by tuckbick, published on GitHub. It is a 2-layer board measuring 39.4 × 78.9 mm, with 7 components from 7 distinct parts.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
re-imagining my pen plotter / cnc controller
DrawBot is a custom, ESP32-based controller board and large-format CoreXY pen plotter.
This project was built to scale up the traditional desktop plotter experience. By moving to a custom ESP32 PCB running FluidNC, this iteration eliminates the need for multiple microcontrollers and messy wiring, wrapping WiFi control, SD card hosting, and heavy-duty motor driving into one clean package.
Drawbot frame hub bill of materials (BOM)
7 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Y-Limit | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J1 |
| 1 | Toolhead Signal IN | RJ45_HALO_HFJ11-x2450HRL_Horizontal | N1 |
| 1 | Toolhead Signal OUT | RJ45_HALO_HFJ11-x2450HRL_Horizontal | N2 |
| 1 | Z-Axis IN | RJ45_HALO_HFJ11-x2450HRL_Horizontal | N3 |
| 1 | Z-Axis OUT | RJ45_HALO_HFJ11-x2450HRL_Horizontal | N4 |
| 1 | Laser Power IN | RJ45_HALO_HFJ11-x2450HRL_Horizontal | N5 |
| 1 | Laser Power OUT | RJ45_HALO_HFJ11-x2450HRL_Horizontal | N6 |
Drawbot frame hub design files
The KiCad project lives in the tuckbick/drawbot repository on GitHub; these links point at the commit this page was built from.
Drawbot frame hub: common questions
How big is the Drawbot frame hub PCB?
The Drawbot frame hub measures 39.4 × 78.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Drawbot frame hub?
7 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Drawbot frame hub design files?
From the tuckbick/drawbot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Drawbot frame hub design in my own project?
The repository has no license, so all rights stay with tuckbick. Use it as a reference, and ask the author before reusing the design.
More boards in drawbot
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k