Sensor Board

tuw-cpsg·kicad-templates·nrf52840-dcdc-ext-supply/nrf52840.kicad_pcb

Sensor Board layout, top view — open source Nordic nRF board by tuw-cpsg

About the Sensor Board

Sensor Board is an open source Nordic nRF PCB design by tuw-cpsg, published on GitHub. It is a 3-layer board measuring 33.1 × 38.2 mm, with 37 components from 22 distinct parts.

Its main chip is the nRF52840, from the Nordic nRF family. By type, the board carries 24 capacitors, 5 inductors, 2 crystals, 2 connectors, 2 resistors and 1 IC.

It belongs with the sensors designs in this gallery.

Main components on the Sensor Board

Sensor Board bill of materials (BOM)

37 components, 22 distinct parts.

QtyPartRefs
1
nRF52840
U1
1
32MHz
X1
1
32,768kHz
X2
1
Conn_ARM_JTAG_SWD_10
J1
1
USB_B_Micro
J2
1
PRTR5V0U2X
D1
1
120R/0,55A
FB1
1
15nH
L1
2
10µH
L2, L4
1
3,9nH
L3
6
100nF
C1, C2, C5, C15, C22, C24
1
820pF
C3
1
C
C4
2
1µF
C6, C8
2
1pF
C7, C11
1
47nF
C9
4
4,7µF
C10, C16, C17, C18
1
100pF
C12
4
12pF
C13, C14, C19, C20
1
10µF
C21
Show 2 more
QtyPartRefs
1
10nF
C23
2
0
R1, R2

Sensor Board design files

The KiCad project lives in the tuw-cpsg/kicad-templates repository on GitHub; these links point at the commit this page was built from.

Sensor Board: common questions

What microcontroller does the Sensor Board use?

The Sensor Board is built around the nRF52840, from the Nordic nRF family.

How big is the Sensor Board?

The Sensor Board measures 33.1 × 38.2 mm, has 3 copper layers and is 1.6 mm thick.

How many components are on the Sensor Board?

37 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sensor Board design files?

From the tuw-cpsg/kicad-templates repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Sensor Board design in my own project?

The repository has no license, so all rights stay with tuw-cpsg. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Sensor Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in kicad-templates

Similar boards