PSU
tuxy·psu
About the PSU PCB
PSU is an open source RP2040/RP2350 PCB design by tuxy, published on GitHub. It is a 2-layer board measuring 142.5 × 141.8 mm, with 71 components from 18 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the INA260. By type, the board carries 27 capacitors, 11 connectors, 10 resistors, 7 ICs, 7 fuses and 7 diodes.
From the project
test mini rack psu
Main components on the PSU
PSU bill of materials (BOM)
71 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | INA260 | TSSOP-16_4.4x5mm_P0.65mm | U1, U2, U3, U4, U5, U6 |
| 1 | ~ | W5500Lite | U7 |
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | Fan_4pin | FanPinHeader_1x04_P2.54mm_Vertical | M1 |
| 2 | Conn_01x02_Socket | SolderWire-6sqmm_1x02_P14mm_D3.5mm_OD7mm | J1, J13 |
| 6 | Conn_01x02_Pin | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2, J3, J4, J5, J6, J7 |
| 2 | Conn_02x01 | AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J9, J10 |
| 1 | MP1584EN | MP1584EN | J14 |
| 6 | 10A | Fuse_1206_3216Metric | F1, F2, F3, F4, F5, F6 |
| 1 | 30A | Fuseholder_Keystone_3555-2 | F7 |
| 6 | SMBJ26A | D_SMB | D1, D2, D3, D4, D5, D6 |
| 1 | SMCJ26A | D_SMC | D7 |
| 7 | 470uF | CP_Radial_D10.0mm_P5.00mm | C1, C4, C7, C10, C13, C16, C20 |
| 7 | 1uF | C_1206_3216Metric | C2, C5, C8, C11, C14, C17, C21 |
| 12 | 0.1uF | C_0603_1608Metric | C3, C6, C9, C12, C15, C18, C22, C23 +4 |
| 1 | 1000uF | CP_Radial_D16.0mm_P7.50mm | C19 |
| 4 | 2.2k | R_1206_3216Metric | R1, R2, R3, R4 |
| 6 | 10k | R_1206_3216Metric | R5, R6, R7, R8, R9, R10 |
PSU design files
The KiCad project lives in the tuxy/psu repository on GitHub; these links point at the commit this page was built from.
- LayoutPSU.kicad_pcb
- SchematicPSU.kicad_sch
PSU: common questions
What microcontroller does the PSU use?
The PSU is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the PSU PCB?
The PSU measures 142.5 × 141.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PSU?
71 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the PSU design files?
From the tuxy/psu repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PSU design in my own project?
The repository has no license, so all rights stay with tuxy. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PSU without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in psu
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k