Midi keyboard
TVDVT·midi-keyboard·production/midi keyboard.kicad_pcb
About the Midi keyboard PCB
Midi keyboard is an open source ESP32 PCB design by TVDVT, published on GitHub. It is a 2-layer board measuring 116 × 105 mm, with 10 components from 5 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 5 switches, 3 diodes, 1 IC and 1 connector.
It belongs with the keyboards and audio designs in this gallery.
From the project
A piano-like keyboard that can play music. I used to play the organ and the piano when I was young, so I want to make this a compact 2-in-1, where I can change the sound of each note! Sadly it only contains the white notes, but a lot can be made from these.
A piano-like keyboard that can play music. I used to play the organ and the piano when I was young, so I want to make this a compact 2-in-1, where I can change the sound of each note! Sadly it only contains the white notes, but a lot can be made from these.
- Three MX switches to play some beats - Two rotary encoders (to adjust the pitch and volume) - 7 capacitive touch keys (do, re, mi, fa, sol, la, si) - 3 LED lights (DJ!)
Main components on the Midi keyboard
Midi keyboard bill of materials (BOM)
10 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U2 |
| 1 | Capacitive Touch Buttons | touch | J1 |
| 3 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW4, SW6 |
| 2 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2, SW3 |
| 3 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3 |
Midi keyboard design files
The KiCad project lives in the TVDVT/midi-keyboard repository on GitHub; these links point at the commit this page was built from.
Midi keyboard: common questions
What microcontroller does the Midi keyboard use?
The Midi keyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the Midi keyboard PCB?
The Midi keyboard measures 116 × 105 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Midi keyboard?
10 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Midi keyboard design files?
From the TVDVT/midi-keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Midi keyboard design in my own project?
The repository has no license, so all rights stay with TVDVT. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Midi keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k