MicSwitch
twfth9·Kenwood-Handset-Switch-PCB·Hardware/InterfaceModule/MicSwitch.kicad_pcb
About the MicSwitch PCB
MicSwitch is an open source PCB design by twfth9, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 91 × 91 mm, with 63 components from 17 distinct parts.
By type, the board carries 23 jumpers, 13 diodes, 9 connectors, 8 relays and 6 resistors.
MicSwitch bill of materials (BOM)
63 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D-700 MIC | Mystery_RJ45 | J201 |
| 1 | TS-480 MIC | Mystery_RJ45 | J202 |
| 1 | D-700 EXT.SP 1 | Mystery_3.5mm | J204 |
| 1 | D-700 EXT.SP Passthrough | Mystery_3.5mm | J206 |
| 1 | TS-480 EXT.SP | Mystery_3.5mm | J207 |
| 1 | TS-480 EXT.SP Passthrough | Mystery_3.5mm | J208 |
| 1 | External MIC IN | Mystery_RJ45 | J209 |
| 1 | 2x05 IDC Header - IN | IDC-Header_2x05_P2.54mm_Vertical | J210 |
| 1 | 2x05 IDC Header - OUT | IDC-Header_2x05_P2.54mm_Vertical | J211 |
| 4 | Mounting Hole | M3_Mounting | H201, H202, H203, H204 |
| 23 | Jumper_2_Bridged | 1.0mm_Bridge | JP201, JP202, JP203, JP204, JP205, JP206, JP207, JP208 +15 |
| 8 | FINDER-40.52 | Relay_DPDT_Finder_30.22 | K201, K202, K203, K204, K205, K206, K207, K208 |
| 11 | D_Small_Filled | D_A-405_P2.54mm_Vertical_AnodeUp | D201, D202, D203, D204, D205, D206, D207, D208 +3 |
| 2 | LED | LED_D3.0mm | D212, D213 |
| 2 | 3.9Ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R201, R202 |
| 2 | 470Ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R203, R204 |
| 2 | 680Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R205, R206 |
MicSwitch design files
The KiCad project lives in the twfth9/Kenwood-Handset-Switch-PCB repository on GitHub; these links point at the commit this page was built from.
MicSwitch: common questions
How big is the MicSwitch PCB?
The MicSwitch measures 91 × 91 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MicSwitch?
63 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the MicSwitch design files?
From the twfth9/Kenwood-Handset-Switch-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MicSwitch design in my own project?
Yes, under the terms of its GPL-3.0 license, which twfth9 chose for the repository.
More boards in Kenwood-Handset-Switch-PCB
Microchip SAM
DATA Switcher
twfth9
100 × 100 mm667 parts4LGPL-3.00InterfaceModule
twfth9
187 × 187 mm243 parts2LGPL-3.001-DIN Control Panel
twfth9
177.8 × 120.9 mm82 parts2LGPL-3.00Main-GPSSwitching
twfth9
91 × 91 mm72 parts2LGPL-3.00DataSwitching
twfth9
91 × 91 mm55 parts2LGPL-3.00COMSwitching
twfth9
91 × 91 mm52 parts2LGPL-3.00KrakenSDR AntDisconnect ThruThin
twfth9
210 × 49.5 mm16 parts2LGPL-3.00KrakenSDR AntDisconnect Thru
twfth9
210 × 119.9 mm16 parts2LGPL-3.00KrakenSDR AntDisconnect Edge
twfth9
210 × 42.2 mm16 parts2LGPL-3.005Pole RF Toggle
twfth9
40 × 65.9 mm16 parts2LGPL-3.00KenwoodHandsetSwitch
twfth9
57.6 × 43.5 mm8 parts2LGPL-3.00