DATA Switcher
twfth9·Kenwood-Handset-Switch-PCB·Hardware/AudioPanel/Dev Modules/DATA Switcher/DATA Switcher.kicad_pcb
About the DATA Switcher PCB
DATA Switcher is an open source Microchip SAM PCB design by twfth9, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 100 × 100 mm, with 667 components from 61 distinct parts.
Its main chip is the QTPy SAMD21, from the Microchip SAM family. Other key parts include the 74HC4066BQ, SN74LVC1G14DCKR, NXB0106BQX, USBLC6-2SC6 and AZ1117-5.0. By type, the board carries 225 capacitors, 178 resistors, 87 test points, 84 diodes, 51 ICs and 24 jumpers.
Main components on the DATA Switcher
DATA Switcher bill of materials (BOM)
667 components, 61 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 74HC4066BQ | QFN_104BQX_NEX | U101, U102, U103, U104, U107, U108, U901, U902 +1 |
| 8 | SN74LVC1G14DCKR | SOT-353_SC-70-5 | U105, U106, U117, U118, U203, U303, U403, U503 |
| 1 | NXB0106BQX | RGY16_2P55X2P05 | U109 |
| 1 | QTPy SAMD21 | Py_QT_SAMD21_THT | U110 |
| 4 | USBLC6-2SC6 | SOT-666 | U111, U112, U113, U114 |
| 1 | AZ1117-5.0 | SOT-223-3_TabPin2 | U115 |
| 1 | INA219AxDCN | SOT-23-8 | U116 |
| 16 | TLV2372 | SOIC-8_3.9x4.9mm_P1.27mm | U201, U202, U301, U302, U401, U402, U501, U502 +8 |
| 1 | SN74LV165ARGYR | RGY16_2P55X2P05 | U601 |
| 3 | SN74LV595ARGYR | RGY16_2P55X2P05 | U602, U603, U604 |
| 2 | AP22802AW5-7 | SC-74A-5_1.55x2.9mm_P0.95mm | U701, U801 |
| 2 | SPX3819M5-L | SOT-23-5 | U702, U802 |
| 2 | PCM2902 | SSOP-28_5.3x10.2mm_P0.65mm | U706, U806 |
| 2 | 12MHz | Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | Y701, Y801 |
| 1 | JST-PH UART/I2C | PinHeader_1x06_P2.54mm_Vertical | J101 |
| 1 | 2.54mm | PinHeader_1x10_P2.54mm_Vertical | J102 |
| 2 | 2.54mm | JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal | J103, J104 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J105 |
| 4 | Kenwood DATA | Connector_Mini-DIN_Female_6Pin_2rows | J201, J301, J401, J501 |
| 2 | 2.54mm | PinHeader_1x04_P2.54mm_Vertical | J701, J801 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MINISMDC050-02 | Fuse_0805_2012Metric | F101 |
| 4 | 0ZCJ0010FF2E | Fuse_1206_3216Metric | F201, F301, F401, F501 |
| 24 | Jumper_2_Bridged | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP201, JP202, JP203, JP204, JP205, JP206, JP301, JP302 +16 |
| 87 | TestPoint_Flag | KEYSTONE_5017 | TP101, TP102, TP103, TP104, TP105, TP106, TP107, TP108 +79 |
| 10 | MBR0520 | D_SOD-123 | D101, D114, D701, D702, D704, D706, D801, D802 +2 |
| 1 | SBAV99LT1G | SOT-23 | D102 |
| 42 | Green | Worthington_LED_0603 | D103, D108, D111, D116, D601, D602, D603, D604 +34 |
| 8 | WS2812B | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D104, D105, D106, D107, D109, D110, D112, D113 |
| 1 | Green | LED_D5.0mm | D115 |
| 22 | SD05 | D_SOD-323 | D201, D202, D204, D205, D207, D301, D302, D304 +14 |
| 40 | 100nF | Worthington_C_0402 | C101, C102, C103, C104, C107, C108, C111, C112 +32 |
| 35 | 22uF | Worthington_C_0603 | C105, C106, C109, C110, C113, C115, C125, C127 +27 |
| 2 | 220uF | CP_Elec_6.3x7.7 | C126, C130 |
| 36 | 4u7 | CP_EIA-3216-18_Kemet-A | C201, C207, C209, C216, C217, C301, C307, C309 +28 |
| 12 | 4u7 | Worthington_C_0402 | C202, C210, C215, C302, C310, C315, C402, C410 +4 |
| 16 | 100p | Worthington_C_0402 | C203, C204, C211, C212, C303, C304, C311, C312 +8 |
| 8 | 1nF | Worthington_C_0402 | C214, C218, C314, C318, C414, C418, C514, C518 |
| 46 | 22u | Worthington_C_0603 | C703, C705, C707, C708, C709, C710, C711, C715 +38 |
| 4 | 10n | Worthington_C_0402 | C704, C706, C804, C806 |
| 18 | 100n | Worthington_C_0402 | C712, C716, C717, C721, C728, C741, C742, C743 +10 |
| 4 | 1n | Worthington_C_0402 | C713, C729, C813, C829 |
| 4 | 30p | Worthington_C_0402 | C730, C731, C830, C831 |
| 14 | 4k7 | Worthington_R_0402 | R101, R102, R207, R208, R307, R308, R407, R408 +6 |
| 16 | 1k | Worthington_R_0402 | R103, R104, R106, R108, R110, R111, R217, R218 +8 |
| 2 | 220Ω | Worthington_R_0402 | R105, R107 |
| 1 | 0.5Ω | R_1206_3216Metric | R109 |
| 16 | 2.2k | Worthington_R_0402 | R202, R211, R216, R223, R302, R311, R316, R323 +8 |
| 8 | 0 | Worthington_R_0402 | R203, R212, R303, R312, R403, R412, R503, R512 |
| 12 | 100k | Worthington_R_0402 | R204, R213, R220, R304, R313, R320, R404, R413 +4 |
| 12 | 5k | Worthington_R_0402 | R205, R210, R219, R305, R310, R319, R405, R410 +4 |
| 40 | 10k | Worthington_R_0402 | R206, R209, R214, R222, R306, R309, R314, R322 +32 |
| 14 | 22k | Worthington_R_0402 | R703, R706, R707, R719, R721, R728, R732, R803 +6 |
| 8 | 12k | Worthington_R_0402 | R711, R712, R715, R716, R811, R812, R815, R816 |
| 4 | 3k9 | Worthington_R_0402 | R713, R717, R813, R817 |
| 4 | 100 | Worthington_R_0402 | R714, R718, R814, R818 |
| 2 | 1M | Worthington_R_0402 | R725, R825 |
| 4 | 1k5 | Worthington_R_0402 | R726, R727, R826, R827 |
| 4 | 22 | Worthington_R_0402 | R730, R731, R830, R831 |
| 5 | 10k | RES_ARRAY_4RES_0804 | RN101, RN102, RN104, RN105, RN106 |
| 9 | 1k | RES_ARRAY_4RES_0804 | RN601, RN602, RN605, RN606, RN607, RN609, RN901, RN905 +1 |
| 3 | 680 | RES_ARRAY_4RES_0804 | RN902, RN903, RN904 |
DATA Switcher design files
The KiCad project lives in the twfth9/Kenwood-Handset-Switch-PCB repository on GitHub; these links point at the commit this page was built from.
DATA Switcher: common questions
What microcontroller does the DATA Switcher use?
The DATA Switcher is built around the QTPy SAMD21, from the Microchip SAM family.
How big is the DATA Switcher PCB?
The DATA Switcher measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the DATA Switcher?
667 components, from 61 distinct parts. The full bill of materials is listed on this page.
Where can I download the DATA Switcher design files?
From the twfth9/Kenwood-Handset-Switch-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DATA Switcher design in my own project?
Yes, under the terms of its GPL-3.0 license, which twfth9 chose for the repository.
Can I test firmware for the DATA Switcher without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in Kenwood-Handset-Switch-PCB
InterfaceModule
twfth9
187 × 187 mm243 parts2LGPL-3.001-DIN Control Panel
twfth9
177.8 × 120.9 mm82 parts2LGPL-3.00Main-GPSSwitching
twfth9
91 × 91 mm72 parts2LGPL-3.00MicSwitch
twfth9
91 × 91 mm63 parts2LGPL-3.00DataSwitching
twfth9
91 × 91 mm55 parts2LGPL-3.00COMSwitching
twfth9
91 × 91 mm52 parts2LGPL-3.00KrakenSDR AntDisconnect ThruThin
twfth9
210 × 49.5 mm16 parts2LGPL-3.00KrakenSDR AntDisconnect Thru
twfth9
210 × 119.9 mm16 parts2LGPL-3.00KrakenSDR AntDisconnect Edge
twfth9
210 × 42.2 mm16 parts2LGPL-3.005Pole RF Toggle
twfth9
40 × 65.9 mm16 parts2LGPL-3.00KenwoodHandsetSwitch
twfth9
57.6 × 43.5 mm8 parts2LGPL-3.00
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416