1-DIN Control Panel
twfth9·Kenwood-Handset-Switch-PCB·Hardware/1-DIN_Control_Panel/1-DIN_Control_Panel.kicad_pcb
About the 1-DIN Control Panel PCB
1-DIN Control Panel is an open source PCB design by twfth9, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 177.8 × 120.9 mm, with 82 components from 36 distinct parts.
Other key parts include the XZFAVG10, MMPQ3904, MAX 6954 - SSOP, LM324DR and 12V->5V Variable Boost Buck Converter. By type, the board carries 28 resistors, 14 capacitors, 13 ICs, 13 connectors, 10 diodes and 1 fuse.
Main components on the 1-DIN Control Panel
1-DIN Control Panel bill of materials (BOM)
82 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | XZFAVG10 | XZFAVG10 | U1, U2, U3, U4, U7, U8, U9, U10 |
| 2 | MMPQ3904 | SOIC-16_4.55x10.3mm_P1.27mm | U5, U6 |
| 1 | MAX 6954 - SSOP | MAX6954-SSOP | U11 |
| 1 | LM324DR | SOIC-14_3.9x8.7mm_P1.27mm | U12 |
| 1 | 12V->5V Variable Boost Buck Converter | BoostBuck | U13 |
| 1 | Selector Knob Connector | Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J1 |
| 1 | Rotary Switch 1x7 | Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J2 |
| 1 | 2x05 Molex Micro-Fit 3.0 43045 | Molex_Micro-Fit_3.0_43045-1012_2x05_P3.00mm_Vertical | J3 |
| 1 | UART Expansion | Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical | J4 |
| 1 | SW - Aux Jump-Start | Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical | J5 |
| 1 | SW - Battery Bypass | Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical | J6 |
| 1 | SW - Master Power | Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical | J7 |
| 1 | Pot/SW - Brightness | Molex_Micro-Fit_3.0_43650-0515_1x05_P3.00mm_Vertical | J8 |
| 3 | 2x05 Molex Micro-Fit 3.0 43045 | MOLEX_430450615 | J9, J10, J11 |
| 1 | Display LEDs | Molex_Micro-Fit_3.0_43045-0815_2x04_P3.00mm_Vertical | J12 |
| 1 | Mode LEDs | Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J13 |
| 1 | 1A Trip | Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | FINDER-40.52 | Relay_DPDT_Finder_30.22 | K1 |
| 1 | 500Ω | Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | VAL** | mouse-bite-5mm-slot | mouse-bite-5mm-slot |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | LED_Filled | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7 |
| 3 | D | D_A-405_P2.54mm_Vertical_AnodeUp | D8, D9, D10 |
| 1 | 22pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 47µF | CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C2 |
| 8 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6, C7, C9, C10, C15 |
| 1 | 10µF | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C11 |
| 2 | DNP | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13 |
| 1 | 22µF | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C14 |
| 3 | 10kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R11, R13 |
| 7 | 150Ω | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5, R6, R7, R8 |
| 1 | 0Ω or Bridge | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 56kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 22kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 6 | 100kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R16, R17, R18, R19, R20 |
| 1 | 2.7kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 8 | 39kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R23, R24, R25, R26, R27, R28, R29 |
1-DIN Control Panel design files
The KiCad project lives in the twfth9/Kenwood-Handset-Switch-PCB repository on GitHub; these links point at the commit this page was built from.
1-DIN Control Panel: common questions
How big is the 1-DIN Control Panel PCB?
The 1-DIN Control Panel measures 177.8 × 120.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 1-DIN Control Panel?
82 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the 1-DIN Control Panel design files?
From the twfth9/Kenwood-Handset-Switch-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 1-DIN Control Panel design in my own project?
Yes, under the terms of its GPL-3.0 license, which twfth9 chose for the repository.
More boards in Kenwood-Handset-Switch-PCB
Microchip SAM
DATA Switcher
twfth9
100 × 100 mm667 parts4LGPL-3.00InterfaceModule
twfth9
187 × 187 mm243 parts2LGPL-3.00Main-GPSSwitching
twfth9
91 × 91 mm72 parts2LGPL-3.00MicSwitch
twfth9
91 × 91 mm63 parts2LGPL-3.00DataSwitching
twfth9
91 × 91 mm55 parts2LGPL-3.00COMSwitching
twfth9
91 × 91 mm52 parts2LGPL-3.00KrakenSDR AntDisconnect ThruThin
twfth9
210 × 49.5 mm16 parts2LGPL-3.00KrakenSDR AntDisconnect Thru
twfth9
210 × 119.9 mm16 parts2LGPL-3.00KrakenSDR AntDisconnect Edge
twfth9
210 × 42.2 mm16 parts2LGPL-3.005Pole RF Toggle
twfth9
40 × 65.9 mm16 parts2LGPL-3.00KenwoodHandsetSwitch
twfth9
57.6 × 43.5 mm8 parts2LGPL-3.00