HardLabs

Gps adapter

Twisted-Fields·acorn-robot-electronics·gps_adapter/gps_adapter.kicad_pcb

Gps adapter PCB layout, top view — open source board by Twisted-Fields

About the Gps adapter PCB

Gps adapter is an open source PCB design by Twisted-Fields, published on GitHub. It is a 2-layer board measuring 106.5 × 43.5 mm, with 5 components from 3 distinct parts.

Other key parts include the GPS-RTK-SMA. By type, the board carries 2 ICs, 2 jumpers and 1 connector.

It belongs with the robotics & motion and rf & radio designs in this gallery.

From the project

PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

PCBs designed in Kicad for Acorn the farming robot.

Our dream is that you will fab your own boards, make changes, and share your work - giving this design life beyond our efforts.

Designed by Taylor Alexander for Twisted Fields, for the Acorn Precision Farming Rover.

Many thanks to Daniel Theobald. Without your financial support and encouragement this project would not have been possible.

Gps adapter, from the project README
From the project README

Main components on the Gps adapter

GPS-RTK-SMA

Gps adapter bill of materials (BOM)

5 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
GPS-RTK-SMA
U1, U2
1
Serial Input
J3
2
SOLDERJUMPER_2_OPEN
SolderJumper_2_Open
JP1, JP2

Gps adapter design files

The KiCad project lives in the Twisted-Fields/acorn-robot-electronics repository on GitHub; these links point at the commit this page was built from.

Gps adapter: common questions

How big is the Gps adapter PCB?

The Gps adapter measures 106.5 × 43.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Gps adapter?

5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Gps adapter design files?

From the Twisted-Fields/acorn-robot-electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Gps adapter design in my own project?

The repository has no license, so all rights stay with Twisted-Fields. Use it as a reference, and ask the author before reusing the design.

More boards in acorn-robot-electronics

Similar boards