HardLabs

Supercap simple

Twisted-Fields·acorn-robot-electronics·supercap/supercap_simple/supercap_simple.kicad_pcb

Supercap simple PCB layout, top view — open source board by Twisted-Fields
Simulate this board

About the Supercap simple PCB

Supercap simple is an open source PCB design by Twisted-Fields, published on GitHub. It is a 4-layer board measuring 80 × 156 mm, with 46 components from 5 distinct parts.

By type, the board carries 20 diodes, 20 capacitors and 6 connectors.

It belongs with the robotics & motion designs in this gallery.

From the project

PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

PCBs designed in Kicad for Acorn the farming robot.

Our dream is that you will fab your own boards, make changes, and share your work - giving this design life beyond our efforts.

Designed by Taylor Alexander for Twisted Fields, for the Acorn Precision Farming Rover.

Many thanks to Daniel Theobald. Without your financial support and encouragement this project would not have been possible.

Supercap simple, from the project README
From the project README

Supercap simple bill of materials (BOM)

46 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
CONN_01X02
Conn_01x02
J1, J2, J4, J5
1
XT30PW-M
J3
1
XT30PW-F20.G.Y
J6
20
C551192
2.4v zener
D2, D3, D4, D5, D6, D7, D8, D9 +12
20
120F 2.3v
C5, C6, C7, C8, C9, C10, C11, C12 +12

Supercap simple design files

The KiCad project lives in the Twisted-Fields/acorn-robot-electronics repository on GitHub; these links point at the commit this page was built from.

Supercap simple: common questions

How big is the Supercap simple PCB?

The Supercap simple measures 80 × 156 mm, has 4 copper layers and is 1.609 mm thick.

How many components are on the Supercap simple?

46 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Supercap simple design files?

From the Twisted-Fields/acorn-robot-electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Supercap simple design in my own project?

The repository has no license, so all rights stay with Twisted-Fields. Use it as a reference, and ask the author before reusing the design.

More boards in acorn-robot-electronics

Similar boards