6 open source boards using the MCP6286T-E/OT
Real designs built with the MCP6286T-E/OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
SmartEffector
Duet3D
84.1 × 72.8 mm45 parts2LCERN-OHL-1.226STM32
Batgizmo logger
jmears63
58 × 48 mm89 parts4LCERN-OHL-P-2.05RP2040/RP2350
H&S Board
UCLA-Bruin-Supermileage
109.8 × 74 mm56 parts2LNo license1RP2040/RP2350
SMV H and S Board
UCLA-Bruin-Supermileage
102.3 × 63 mm45 parts2LNo license1RP2040/RP2350
Joulemeter
UCLA-Bruin-Supermileage
70.4 × 82.5 mm39 parts2LNo license1RP2040/RP2350
Nabeel's Joulemeter
UCLA-Bruin-Supermileage
80 × 79.1 mm38 parts2LNo license1
The MCP6286T-E/OT in open source designs
The gallery holds 6 open source boards using the MCP6286T-E/OT from 3 GitHub repositories; a typical one measures about 82.1 × 73.4 mm and carries around 45 components.
83% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is SmartEffector by Duet3D.
Microcontrollers on boards using the MCP6286T-E/OT
MCP6286T-E/OT: common questions
Where can I find a MCP6286T-E/OT reference design?
Each of the 6 boards on this page is a real design using the MCP6286T-E/OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6286T-E/OT use?
Most are built on RP2040/RP2350 (4), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the MCP6286T-E/OT?
The median is 82.1 × 73.4 mm, and 83% are two-layer designs.
What is the most popular open source board using the MCP6286T-E/OT?
By GitHub stars, SmartEffector by Duet3D, with 26 stars.
Can I simulate one of these boards using the MCP6286T-E/OT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.