Usb pd card
ulyssecrn·usb-pd-card
About the Usb pd card PCB
Usb pd card is an open source WCH CH32/CH55x PCB design by ulyssecrn, published on GitHub. It is a 2-layer board measuring 85.6 × 54 mm, with 42 components from 16 distinct parts.
Its main chip is the CH32X035G8U6, from the WCH CH32/CH55x family. Other key parts include the ME6228A33M3G and NT3H2111W0FHKH. By type, the board carries 18 resistors, 16 diodes, 5 capacitors and 3 ICs.
It belongs with the power & battery designs in this gallery.
From the project
PCB business card: USB-C PD charger tester + battery-free NFC tag.
A credit-card-sized PCB business card that is also a USB-C PD charger tester and a battery-free NFC tag.

Main components on the Usb pd card
Usb pd card bill of materials (BOM)
42 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32X035G8U6 | WQFN-28-1EP_4x4mm_P0.4mm_EP2.7x2.7mm | U1 |
| 1 | ME6228A33M3G MICRONE(南京微盟) | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U2 |
| 1 | NT3H2111W0FHKH NXP(恩智浦) | XQFN-8_L1.6-W1.6-P0.50-BL_NT3H2111W0FHKH | U3 |
| 1 | SMF20A | D_SOD-123F | D1 |
| 13 | LED | LED_0603_1608Metric | D2, D5, D6, D7, D8, D9, D10, D11 +5 |
| 2 | H7VL10B | D_0402_1005Metric | D3, D4 |
| 1 | 220NF 220nF | C_0402_1005Metric | C1 |
| 2 | 10UF 10uF | C_0603_1608Metric | C2, C4 |
| 1 | tune | C_0402_1005Metric | C3 |
| 1 | 100NF 100nF | C_0402_1005Metric | C5 |
| 1 | 47 | R_0402_1005Metric | R1 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R2, R3 |
| 1 | 100K 100k | R_0402_1005Metric | R4 |
| 1 | 15K 15k | R_0402_1005Metric | R5 |
| 1 | 10K 10k | R_0402_1005Metric | R6 |
| 12 | 1k | R_0402_1005Metric | R7, R8, R9, R10, R11, R12, R13, R14 +4 |
Usb pd card design files
The KiCad project lives in the ulyssecrn/usb-pd-card repository on GitHub; these links point at the commit this page was built from.
Usb pd card: common questions
What microcontroller does the Usb pd card use?
The Usb pd card is built around the CH32X035G8U6, from the WCH CH32/CH55x family.
How big is the Usb pd card PCB?
The Usb pd card measures 85.6 × 54 mm, has 2 copper layers and is 0.6 mm thick.
How many components are on the Usb pd card?
42 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usb pd card design files?
From the ulyssecrn/usb-pd-card repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Usb pd card design in my own project?
The repository has no license, so all rights stay with ulyssecrn. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Usb pd card without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.
Similar boards
WCH CH32/CH55x
Ps2usb
rasteri
40 × 55 mm25 parts2LNo license428WCH CH32/CH55x
CH32X-60-ANSI-Improved
rgoulter
285 × 94.2 mm149 parts2LNo license230WCH CH32/CH55x
CH32X-75
rgoulter
285 × 94.2 mm318 parts2LNo license230WCH CH32/CH55x
CH32X-48
rgoulter
224.6 × 74.2 mm112 parts2LNo license230WCH CH32/CH55x
CH552-48
rgoulter
224.6 × 74.2 mm107 parts2LNo license230WCH CH32/CH55x
Webusb programmer rev6
laneboysrc
38 × 20 mm18 parts2LMIT87