11 open source boards using the CH32X035G8U6
Real designs built with the CH32X035G8U6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
WCH CH32/CH55x
Isolated reindvstrialize usb hub
American-Embedded
65.3 × 65 mm140 parts6LCERN-OHL-P-2.01WCH CH32/CH55x
Fan adapter
wormyrocks
30.1 × 69 mm37 parts2LNo license1WCH CH32/CH55x
Module-I2C-picohub-MOD-0011
buildwithnoknok
80 × 40 mm113 parts2LMIT0WCH CH32/CH55x
CACKLE-PSU-2s 40A PSU and charger
techy-robot
45 × 20 mm95 parts4LCC-BY-NC-4.00WCH CH32/CH55x
CACKLE-PSU-USB 2A PSU 1side
techy-robot
30 × 20 mm42 parts2LCC-BY-NC-4.00WCH CH32/CH55x
Usb pd card
ulyssecrn
85.6 × 54 mm42 parts2LNo license0WCH CH32/CH55x
Tile
Bruhdows
68 × 68 mm109 parts4LNo license1WCH CH32/CH55x
Ch32x035-promicro usb device
74th
17.8 × 31.8 mm24 parts2LMIT10WCH CH32/CH55x
CH32X035G8U6
jay94ks
22.8 × 41.4 mm16 parts2LMIT0WCH CH32/CH55x
CoB DIP Breakout
TinyTapeout
19 × 42.1 mm33 parts4LApache-2.021WCH CH32/CH55x
Ch32x035-promicro usb pd
74th
17.8 × 31.8 mm17 parts2LMIT10
How designs wire the CH32X035G8U6
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the CH32X035G8U6 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 4.7 µF).
- The PC15/CC2_1 pin has a resistor to GND on 8 of 10 designs, most often 5.1 kΩ.
- The PC14/CC1_28 pin has a resistor to GND on 8 of 10 designs, most often 5.1 kΩ.
- The PB12_23 pin is left unconnected on 6 of 10 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PC15/CC2_1pin 1 | Connected to: A connector 80% |
|
| VDDpin 2 | Connected to: 3.3V 80% · a signal 20% |
|
| PB1/PB5_16pin 16 | Connected to: Signal 90% |
|
| PB8_19pin 19 | Connected to: Not connected 50% · a signal 50% |
|
| PB9_20pin 20 | Connected to: Not connected 50% · a signal 50% |
|
| PB12_23pin 23 | Connected to: Not connected 60% · a signal 40% | — |
| PC14/CC1_28pin 28 | Connected to: A connector 80% |
|
| GND_29pin 29 | Connected to: GND 100% | — |
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CoB DIP Breakout by TinyTapeout, Ch32x035-promicro usb device by 74th, Isolated reindvstrialize usb hub by American-Embedded and Tile by Bruhdows.
The CH32X035G8U6 in open source designs
The gallery holds 11 open source boards using the CH32X035G8U6 from 10 GitHub repositories; a typical one measures about 30 × 41.4 mm and carries around 42 components.
64% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.
The most starred is CoB DIP Breakout by TinyTapeout.
Parts used alongside the CH32X035G8U6
Microcontrollers on boards using the CH32X035G8U6
What boards using the CH32X035G8U6 are built for
CH32X035G8U6: common questions
Where can I find a CH32X035G8U6 reference design?
Each of the 11 boards on this page is a real design using the CH32X035G8U6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the CH32X035G8U6 VDD pin?
The VDD pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 10 open source designs using the CH32X035G8U6.
What resistor goes on the CH32X035G8U6 PC15/CC2_1 pin?
The PC15/CC2_1 pin has a resistor to GND on 8 of 10 designs, most often 5.1 kΩ. Counted from the KiCad layouts of 10 open source designs using the CH32X035G8U6.
What resistor goes on the CH32X035G8U6 PC14/CC1_28 pin?
The PC14/CC1_28 pin has a resistor to GND on 8 of 10 designs, most often 5.1 kΩ. Counted from the KiCad layouts of 10 open source designs using the CH32X035G8U6.
What parts are used alongside the CH32X035G8U6?
The AP2112K-3.3TRG1, AP63203WU, THVD1420DRLR, TPS7A2633DRV and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the CH32X035G8U6 use?
Most are built on WCH CH32/CH55x (11).
How big is a typical board using the CH32X035G8U6?
The median is 30 × 41.4 mm, and 64% are two-layer designs.
What is the most popular open source board using the CH32X035G8U6?
By GitHub stars, CoB DIP Breakout by TinyTapeout, with 21 stars.
Can I simulate one of these boards using the CH32X035G8U6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.