PowerPack
UMDBPP·Rudolph·Hardware/PowerPack/PowerPack.kicad_pcb
About the PowerPack PCB
PowerPack is an open source PCB design by UMDBPP, published on GitHub. It is a 4-layer board measuring 45.6 × 25 mm, with 51 components from 33 distinct parts.
Other key parts include the TPS2121RUXR, LT6703CDC-3, MAX77857 and MAX25232ATCB/V+T. By type, the board carries 21 capacitors, 14 resistors, 4 ICs, 4 test points, 4 inductors and 3 connectors.
It belongs with the rf & radio designs in this gallery.
From the project
2nd version of a LoRa tracker now using a +30dBm radio coupled with a MIA-M10 for proper tracking.
The system is split into two boards. The primary "logic" board contains the embedded and RF devices. The PowerPack contains all of the necessary circuitry to switch between USB and Battery power sources as well as produce +5V and +3.3V filtered supply rails.
Main components on the PowerPack
PowerPack bill of materials (BOM)
51 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS2121RUXR | TPS2121 | U1 |
| 1 | LT6703CDC-3 | DFN-3-1EP-2x2mm_P0.5mm_EP1x1.35mm | U2 |
| 1 | MAX77857 | MAX77857-35WLP | U3 |
| 1 | MAX25232ATCB/V+T | MAX25232 | U5 |
| 2 | 529910208 | CON_529910208 | J2, J3 |
| 1 | XT30 | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J4 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 4 | TestPoint | TestPoint_Keystone_5000-5004_Miniature | TP1, TP2, TP3, TP4 |
| 1 | 1.0uH | L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 2 | 3.3uH | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L2, L4 |
| 1 | 2.2uH | L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L3 |
| 2 | 10uF | C_0603_1608Metric | C1, C5 |
| 3 | 1uF | C_0603_1608Metric | C2, C4, C18 |
| 1 | 10nF | C_0402_1005Metric | C3 |
| 4 | 10uF | C_0805_2012Metric | C6, C7, C13, C14 |
| 2 | 220nF | C_0603_1608Metric | C8, C9 |
| 1 | 10pF | C_0603_1608Metric | C10 |
| 1 | 2.2uF | C_0603_1608Metric | C11 |
| 1 | 470nF | C_0402_1005Metric | C12 |
| 4 | 15uF | C_0805_2012Metric | C15, C19, C20, C21 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7uF | C_0603_1608Metric | C16 |
| 1 | 0.1uF | C_0402_1005Metric | C17 |
| 1 | 44.2k | R_0402_1005Metric | R3 |
| 2 | 23.7k | R_0402_1005Metric | R4, R9 |
| 2 | 5k | R_0402_1005Metric | R5, R10 |
| 1 | 1.05M | R_0402_1005Metric | R6 |
| 1 | 154k | R_0402_1005Metric | R7 |
| 1 | 510k | R_0402_1005Metric | R8 |
| 1 | 64.9k | R_0402_1005Metric | R11 |
| 1 | 178k | R_0402_1005Metric | R12 |
| 1 | 12.7k | R_0402_1005Metric | R13 |
| 2 | 100m | R_0805_2012Metric | R14, R17 |
| 1 | 20k | R_0402_1005Metric | R15 |
PowerPack design files
The KiCad project lives in the UMDBPP/Rudolph repository on GitHub; these links point at the commit this page was built from.
PowerPack: common questions
How big is the PowerPack PCB?
The PowerPack measures 45.6 × 25 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PowerPack?
51 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the PowerPack design files?
From the UMDBPP/Rudolph repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PowerPack design in my own project?
The repository has no license, so all rights stay with UMDBPP. Use it as a reference, and ask the author before reusing the design.
More boards in Rudolph
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568