RF-Design
unaldevelopment·RF-Design·Rf -Design/Rf -Design.kicad_pcb
About the RF-Design PCB
RF-Design is an open source STM32 PCB design by unaldevelopment, published on GitHub under the MIT license. It is a 4-layer board measuring 39.8 × 17.2 mm, with 36 components from 25 distinct parts.
Its main chip is the STM32L432KBUx, from the STM32 family. Other key parts include the XC6206PxxxMR, USBLC6-2SC6 and nRF24L01P. By type, the board carries 18 capacitors, 5 resistors, 4 ICs, 4 inductors, 3 connectors and 1 crystal.
Main components on the RF-Design
RF-Design bill of materials (BOM)
36 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206PxxxMR | SOT-23 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | STM32L432KBUx | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U3 |
| 1 | nRF24L01P | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U4 |
| 1 | Crystal_GND23 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | SMA | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J2 |
| 1 | SWD | PinHeader_2x05_P1.27mm_Vertical | J3 |
| 1 | 100mA | Fuse_1206_3216Metric | F1 |
| 1 | 100 @ 100MHz | L_0805_2012Metric | FB1 |
| 3 | 3n9 | L_0402_1005Metric | L1, L2, L3 |
| 2 | 10u | C_0603_1608Metric | C1, C2 |
| 4 | 100n | C_0402_1005Metric | C3, C5, C6, C7 |
| 1 | 1u | C_0402_1005Metric | C4 |
| 1 | 10u | C_0402_1005Metric | C8 |
| 3 | 10n | C_0402_1005Metric | C9, C10, C11 |
| 1 | 33n | C_0402_1005Metric | C12 |
| 2 | 12p | C_0402_1005Metric | C13, C14 |
| 1 | 1p5 | C_0402_1005Metric | C15 |
| 1 | 1p | C_0402_1005Metric | C16 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2n2 | C_0402_1005Metric | C17 |
| 1 | 4p7 | C_0402_1005Metric | C18 |
| 2 | 10K | R_0402_1005Metric | R1, R6 |
| 2 | 2.2K | R_0402_1005Metric | R2, R3 |
| 1 | 1M | R_0402_1005Metric | R5 |
RF-Design design files
The KiCad project lives in the unaldevelopment/RF-Design repository on GitHub; these links point at the commit this page was built from.
RF-Design: common questions
What microcontroller does the RF-Design use?
The RF-Design is built around the STM32L432KBUx, from the STM32 family.
How big is the RF-Design PCB?
The RF-Design measures 39.8 × 17.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the RF-Design?
36 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the RF-Design design files?
From the unaldevelopment/RF-Design repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RF-Design design in my own project?
Yes, under the terms of its MIT license, which unaldevelopment chose for the repository.
Can I test firmware for the RF-Design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k