15 open source boards using the STM32L432KBUx
Real designs built with the STM32L432KBUx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
RF-to-USB
RemiFM
50 × 20 mm52 parts4LMIT4STM32
Maiana Blue 11.9.2
Haimana
84 × 25 mm110 parts4LNo license3STM32
Attendance-Management-System
rajinthanr
60 × 88.5 mm87 parts2LMIT2STM32
R.F.-Transceiver
ad-astra-et-ultra
54.6 × 20.8 mm38 parts4LMIT2STM32
Keeb
cyao1234
304.8 × 114.3 mm184 parts2LNo license0ESP8266
WeatherStation
aleksul
87.9 × 71.4 mm163 parts2LMIT0STM32
SmallKatBatteryCharger
SmallKatMQP
50 × 50 mm58 parts4LNo license0STM32
TailControllerBoard
SmallKatMQP
50 × 42 mm53 parts4LNo license0STM32
USBPDSolderingIron
keionbis
70 × 13.5 mm40 parts2LNo license0STM32
RF-Design
unaldevelopment
39.8 × 17.2 mm36 parts4LMIT0STM32
Verakey
Veracles-Hackclub
59 × 20 mm26 parts2LNo license0STM32
Transponder-11.9.1
peterantypas
84 × 25 mm109 parts4LGPL-3.0446STM32
Maiana Blue N2000 v8.2
Haimana
46 × 46 mm50 parts2LNo license3STM32
Dorji gps
coffee-and-telesense
70.9 × 70.4 mm86 parts2LNo license2STM32
Watch
sulkith
31 × 31 mm43 parts2LMIT2
How designs wire the STM32L432KBUx
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the STM32L432KBUx connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 12 of 14 designs, most often 100 nF (then 1 µF).
- The PH3 pin has a resistor to GND on 11 of 14 designs, most often 10 kΩ (then 100 kΩ).
- The VDDA pin has a decoupling capacitor on 10 of 14 designs, most often 100 nF (then 1 µF).
- The NRST pin has a capacitor to GND on 6 of 14 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1, 17 | Connected to: 3.3V 100% |
|
| NRSTpin 4 | Connected to: A connector 43% · not connected 29% |
|
| VDDApin 5 | Connected to: 3.3V 100% |
|
| VSSpin 16, 32, 33 | Connected to: GND 93% | — |
| PH3pin 31 | Connected to: Signal 86% |
|
25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Transponder-11.9.1 by peterantypas, RF-to-USB by RemiFM, Maiana Blue 11.9.2 by Haimana and R.F.-Transceiver-PCB by ad-astra-et-ultra.
The STM32L432KBUx in open source designs
The gallery holds 15 open source boards using the STM32L432KBUx from 14 GitHub repositories; a typical one measures about 59 × 31 mm and carries around 53 components.
53% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is Transponder-11.9.1 by peterantypas.
Parts used alongside the STM32L432KBUx
What boards using the STM32L432KBUx are built for
STM32L432KBUx: common questions
Where can I find a STM32L432KBUx reference design?
Each of the 15 boards on this page is a real design using the STM32L432KBUx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32L432KBUx VDD pin?
The VDD pins have a decoupling capacitor on 12 of 14 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 14 open source designs using the STM32L432KBUx.
What resistor goes on the STM32L432KBUx PH3 pin?
The PH3 pin has a resistor to GND on 11 of 14 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 14 open source designs using the STM32L432KBUx.
What decoupling capacitors do designs use on the STM32L432KBUx VDDA pin?
The VDDA pin has a decoupling capacitor on 10 of 14 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 14 open source designs using the STM32L432KBUx.
What parts are used alongside the STM32L432KBUx?
The USBLC6-2SC6, nRF24L01P, AP3211K, FUSB302BMPX and LDFPVR appear in the most repositories here.
Which microcontrollers do boards using the STM32L432KBUx use?
Most are built on STM32 (14) and ESP8266 (1).
How big is a typical board using the STM32L432KBUx?
The median is 59 × 31 mm, and 53% are two-layer designs.
What is the most popular open source board using the STM32L432KBUx?
By GitHub stars, Transponder-11.9.1 by peterantypas, with 446 stars.
Can I simulate one of these boards using the STM32L432KBUx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.