HardLabs

Power Board V-5.0

UofSSpaceTeam·rover-hardware·Projects/Power Distribution/Power Board V-5.0/Power Board V-5.0.kicad_pcb

Power Board V-5.0 layout, top view — open source STM32 board by UofSSpaceTeam
Simulate this board

About the Power Board V-5.0

Power Board V-5.0 is an open source STM32 PCB design by UofSSpaceTeam, published on GitHub. It is a 2-layer board measuring 180.9 × 110.2 mm, with 29 components from 24 distinct parts.

Its main chip is the STM8S003K3T, from the STM32 family. Other key parts include the R-745 and RPA60-2412SFW. By type, the board carries 16 connectors, 5 capacitors, 3 ICs, 1 transistor, 1 fuse and 1 inductor.

From the project

Hardware design files for the Rover project.

Main components on the Power Board V-5.0

R-745RPA60-2412SFWSTM8S003K3T

Power Board V-5.0 bill of materials (BOM)

29 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
R-745
U1
1
RPA60-2412SFW
U2
1
STM8S003K3T
U3
1
2N2219
Q1
1
Pi+Jet
J1
1
USB xtra
J2
2
Fans
J3, J16
2
5v xtra
J4, J5
1
ETH
J6
2
12v xtra
J7, J8
1
Motors Right terminal
J9
1
Motors left terminal
J10
1
Arm 24v
J11
1
Fr. Atch 24v
J12
2
24v xtra
J13, J14
1
USB3_A
J15
1
Battery
24V_LiPo1
1
80A
F1
1
3w
Z1
1
4.7uH
L1
Show 4 more
QtyPartRefs
2
100uF
C1, C5
1
1uF
C2
1
6.8uF
C3
1
6.8nF
C4

Power Board V-5.0 design files

The KiCad project lives in the UofSSpaceTeam/rover-hardware repository on GitHub; these links point at the commit this page was built from.

Power Board V-5.0: common questions

What microcontroller does the Power Board V-5.0 use?

The Power Board V-5.0 is built around the STM8S003K3T, from the STM32 family.

How big is the Power Board V-5.0?

The Power Board V-5.0 measures 180.9 × 110.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Power Board V-5.0?

29 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Power Board V-5.0 design files?

From the UofSSpaceTeam/rover-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Power Board V-5.0 design in my own project?

The repository has no license, so all rights stay with UofSSpaceTeam. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Power Board V-5.0 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in rover-hardware

Similar boards