HardLabs

CustomTeensy

UofSSpaceTeam·rover-hardware·Projects/Computer Boards/CustomTeensy/CustomTeensy.kicad_pcb

CustomTeensy PCB layout, top view — open source NXP board by UofSSpaceTeam

About the CustomTeensy PCB

CustomTeensy is an open source NXP PCB design by UofSSpaceTeam, published on GitHub. It is a 2-layer board measuring 45.7 × 55.9 mm, with 25 components from 14 distinct parts.

Its main chip is the mk20dx256vlh7, from the NXP family. Other key parts include the MKL04Z32_TQFP32 and LP38693. By type, the board carries 11 capacitors, 4 connectors, 4 resistors, 3 ICs, 1 crystal and 1 switch.

From the project

Hardware design files for the Rover project.

Main components on the CustomTeensy

mk20dx256vlh7MKL04Z32_TQFP32LP38693

CustomTeensy bill of materials (BOM)

25 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
mk20dx256vlh7
U1
1
MKL04Z32_TQFP32
U2
1
LP38693
U3
1
CRYSTAL
X1
1
USB-MINI-B
CON1
2
CONN_14
P1, P3
1
CONN_4
P2
1
SW_PUSH
SW1
1
LED
D1
4
2.2uF
C1, C2, C6, C7
5
0.1uF
C3, C4, C5, C8, C10
2
20pF
C11, C12
2
470
R1, R4
2
33
R2, R3

CustomTeensy design files

The KiCad project lives in the UofSSpaceTeam/rover-hardware repository on GitHub; these links point at the commit this page was built from.

CustomTeensy: common questions

What microcontroller does the CustomTeensy use?

The CustomTeensy is built around the mk20dx256vlh7, from the NXP family.

How big is the CustomTeensy PCB?

The CustomTeensy measures 45.7 × 55.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CustomTeensy?

25 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CustomTeensy design files?

From the UofSSpaceTeam/rover-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the CustomTeensy design in my own project?

The repository has no license, so all rights stay with UofSSpaceTeam. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CustomTeensy without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in rover-hardware

Similar boards