Lum0s

usini·lum0s·kicad/lumos.kicad_pcb

Lum0s PCB layout, top view — open source ESP8266 board by usini

About the Lum0s PCB

Lum0s is an open source ESP8266 PCB design by usini, published on GitHub under the MIT license. It is a 2-layer board measuring 50.8 × 37.1 mm, with 9 components from 9 distinct parts.

Its main chip is the WeMos_D1_mini, from the ESP8266 family. By type, the board carries 7 connectors, 1 IC and 1 resistor.

It belongs with the iot & wireless and displays & leds designs in this gallery.

From the project

a LED strip powered by a USB power bank Based on https://github.com/FabLab-Luenen/McLighting

a LED strip powered by a USB power bank Based on https://github.com/FabLab-Luenen/McLighting

Tested Features (see McLighting repo for more information): Lots of animations Websockets control Web interface (sadly not really useable with phone as of now) E1.31 (DMX512 over WiFi) : http://www.live-leds.de/ Retain last state Button Control (for now only one) IR Remote support MQTT Support

Lum0s, from the project README
From the project README

Main components on the Lum0s

Lum0s bill of materials (BOM)

9 components, 9 distinct parts.

QtyPartRefs
1
WeMos_D1_mini
U1
1
USB
J2
1
A0
J3
1
I2C
J4
1
IR
J5
1
BTN1
J6
1
BTN2
J7
1
BTN3
J8
1
4,7KΩ
R1

Lum0s design files

The KiCad project lives in the usini/lum0s repository on GitHub; these links point at the commit this page was built from.

Lum0s: common questions

What microcontroller does the Lum0s use?

The Lum0s is built around the WeMos_D1_mini, from the ESP8266 family.

How big is the Lum0s PCB?

The Lum0s measures 50.8 × 37.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Lum0s?

9 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Lum0s design files?

From the usini/lum0s repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Lum0s design in my own project?

Yes, under the terms of its MIT license, which usini chose for the repository.

Can I test firmware for the Lum0s without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

Similar boards