HardLabs

Phoenix

USSTRocketry·hardware·phoenix/phoenix.kicad_pcb

Phoenix PCB layout, top view — open source NXP board by USSTRocketry

About the Phoenix PCB

Phoenix is an open source NXP PCB design by USSTRocketry, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 35 mm, with 18 components from 12 distinct parts.

Its main chip is the Teensy4.1, from the NXP family. Other key parts include the BMP280, LIS3MDLTR and LSM6DSOXTR. By type, the board carries 5 capacitors, 5 resistors, 4 ICs, 3 diodes and 1 connector.

Phoenix, from the project README
From the project README

Main components on the Phoenix

Teensy4.1BMP280LIS3MDLTRLSM6DSOXTR

Phoenix bill of materials (BOM)

18 components, 12 distinct parts.

QtyPartRefs
1
Teensy4.1
U1
1
BMP280
U2
1
LIS3MDLTR
U3
1
LSM6DSOXTR
U4
1
JST_S4B-XH-A-1
J1
1
LED0
D1
1
LED1
D2
1
LED2
D3
4
100nF
C1, C2, C4, C5
1
1uF
C3
2
4k7
R1, R2
3
10k
R3, R4, R5

Phoenix design files

The KiCad project lives in the USSTRocketry/hardware repository on GitHub; these links point at the commit this page was built from.

Phoenix: common questions

What microcontroller does the Phoenix use?

The Phoenix is built around the Teensy4.1, from the NXP family.

How big is the Phoenix PCB?

The Phoenix measures 80 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Phoenix?

18 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Phoenix design files?

From the USSTRocketry/hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Phoenix design in my own project?

Yes, under the terms of its MIT license, which USSTRocketry chose for the repository.

Can I test firmware for the Phoenix without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in hardware

Similar boards