24 open source boards using the LIS3MDLTR
Real designs built with the LIS3MDLTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Cm4 motherboard
Twisted-Fields
118 × 117 mm238 parts4LNo license81Bwlr3d
teapotlaboratories
36.8 × 90.9 mm88 parts2LMIT18ESP32
Dronemagnav
ajisrawi
64 × 60 mm56 parts4LCustom license11ESP8266
Pcb
PinkFluffyUnic0rn
43 × 40.1 mm65 parts4LGPL-3.010Microchip SAM
Allfc
peregrine-developments
50.8 × 81.3 mm136 parts4LMIT6ESP32
Kompic Mk1b
porupski
44.5 × 50.6 mm121 parts4LGPL-3.03RP2040/RP2350
Sirith pico
winedarksea
158.3 × 50 mm272 parts4LCERN-OHL-W-2.02NXP
Infozilla
USSTRocketry
134 × 45 mm31 parts2LMIT1STM32
Main Ctrl H7
Aiyin4Da-2
80 × 50 mm146 parts4LMIT0STM32
QUT Autopilot Pixracer
Heckus
44.5 × 44.5 mm140 parts4LCustom license0Raspberry Pi
Xmera-ADCS
pleiades-cluster
87.6 × 90 mm97 parts4LNo license0ESP32
ESP-32 Based Avionics and Telemetry Board
devjamescollier
50 × 80 mm95 parts4LCERN-OHL-P-2.00ESP32
ESP-32 Based Avionics Telemetry Board
devjamescollier
50 × 80 mm95 parts4LCERN-OHL-P-2.00Nordic nRF
Siplab wristband
bastlfun
35 × 30.4 mm66 parts4LMIT0ESP32
Dronemagnav
Comrade-rn
64 × 60 mm56 parts4LCustom license0Nordic nRF
Masters Thesis
Keaton-Ruthardt
25 × 20 mm29 parts2LMIT0Kestrel gps
HeyPCB
28 × 28 mm13 parts4LCERN-OHL-S-2.00- schematic only · 262 partsRaspberry Pi
Pcb qa
xxsahanaxx
262 partsNo license0 ESP32
Kompic Mk1
porupski
44.5 × 50.6 mm119 parts4LGPL-3.03NXP
Phoenix
USSTRocketry
80 × 35 mm18 parts2LMIT1STM32
QUT AutoPilot SensorTest board
Heckus
71.5 × 46 mm40 parts2LCustom license0IMU6
selina101
10 × 10 mm15 parts2LNo license0IMU V3
selina101
10 × 12 mm12 parts4LNo license0ESP32
Esp32 lis3mdl
HeyPCB
30 × 48 mm25 parts4LCERN-OHL-S-2.00
How designs wire the LIS3MDLTR
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the LIS3MDLTR connects to, and the resistors, capacitors and other passives placed on it.
- The C1 pin has a capacitor to GND on 18 of 18 designs, most often 100 nF.
- The VDD pin has a decoupling capacitor on 18 of 18 designs, most often 100 nF (then 1 µF).
- The VDD_IO pin has a decoupling capacitor on 18 of 18 designs, most often 100 nF (then 1 µF).
- The RSVD1 pin is tied to GND on 17 of 18 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCL/SPCpin 1 | Connected to: The microcontroller 56% |
|
| RSVD1pin 2 | Connected to: GND 94% | — |
| GNDpin 3 | Connected to: GND 100% | — |
| C1pin 4 | Connected to: Signal 100% |
|
| VDDpin 5 | Connected to: 3.3V 100% |
|
| VDD_IOpin 6 | Connected to: 3.3V 100% |
|
| INTpin 7 | Connected to: Not connected 72% · a signal 28% | — |
| DRDYpin 8 | Connected to: Not connected 67% · a signal 33% | — |
| SDA/SDI/SDOpin 11 | Connected to: The microcontroller 56% |
|
| RSVD2pin 12 | Connected to: GND 94% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cm4 motherboard by Twisted-Fields, Bwlr3d by teapotlaboratories, Dronemagnav by ajisrawi and Allfc by peregrine-developments.
The LIS3MDLTR in open source designs
The gallery holds 24 open source boards using the LIS3MDLTR from 20 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 77 components.
74% use four copper layers or more, and 63% carry an open source license.
The most starred is Cm4 motherboard by Twisted-Fields.
Parts used alongside the LIS3MDLTR
Microcontrollers on boards using the LIS3MDLTR
What boards using the LIS3MDLTR are built for
LIS3MDLTR: common questions
Where can I find a LIS3MDLTR reference design?
Each of the 24 boards on this page is a real design using the LIS3MDLTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LIS3MDLTR C1 pin connected?
The C1 pin has a capacitor to GND on 18 of 18 designs, most often 100 nF. Counted from the KiCad layouts of 18 open source designs using the LIS3MDLTR.
What decoupling capacitors do designs use on the LIS3MDLTR VDD pin?
The VDD pin has a decoupling capacitor on 18 of 18 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 18 open source designs using the LIS3MDLTR.
What decoupling capacitors do designs use on the LIS3MDLTR VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 18 of 18 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 18 open source designs using the LIS3MDLTR.
What parts are used alongside the LIS3MDLTR?
The USBLC6-2SC6, LSM6DSOXTR, MAX-M10S-00B, AP2112K-3.3TRG1 and BMI088 appear in the most repositories here.
Which microcontrollers do boards using the LIS3MDLTR use?
Most are built on ESP32 (7), STM32 (3), Raspberry Pi (3) and NXP (2).
How big is a typical board using the LIS3MDLTR?
The median is 50 × 50 mm, and 26% are two-layer designs.
What is the most popular open source board using the LIS3MDLTR?
By GitHub stars, Cm4 motherboard by Twisted-Fields, with 81 stars.
Can I simulate one of these boards using the LIS3MDLTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.