Charge Controller
UWCubeSat·BMS-EPS-HS2·hardware/Charge Controller Files (Parsa)/Charge Controller.kicad_pcb
About the Charge Controller PCB
Charge Controller is an open source PCB design by UWCubeSat, published on GitHub. It is a 2-layer board measuring 99.5 × 99.5 mm, with 55 components from 35 distinct parts.
Other key parts include the BQ25756RRVR. By type, the board carries 22 resistors, 17 capacitors, 4 transistors, 3 diodes, 2 connectors and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
Repository of the HS-2 Battery Management System
Main components on the Charge Controller
Charge Controller bill of materials (BOM)
55 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ25756RRVR | VQFN36_RRV_TEX | U1 |
| 4 | AONS66614 | AON6482 | Q1, Q2, Q3, Q4 |
| 1 | 61300311121 | PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | 61300211121 | PinHeader_1x02_P2.54mm_Vertical | Bat_Input1 |
| 1 | 860020473008 | CP_Radial_D6.3mm_P2.50mm | C_Sys1 |
| 1 | MCS1632R005FER | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R_BAT_SNS1 |
| 1 | 61300211121 | PinSocket_1x02_P2.54mm_Vertical | Solar_Panel_Input1 |
| 1 | 103AT-2 | 103AT2 | Thermistor1 |
| 1 | KO EELP41.22-Q1S2-25-A8J8-020-R18 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | KB EELP41.12-P1R2-36-3X4X-5-R18 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | SMLD12EN1WT86 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | IHLP6767GZER100M01 | INDPM172172X700N | L1 |
| 4 | CL05B104KA5NNNC | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C8, C9 |
| 2 | CL05A474KA5NNNC | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C7 |
| 1 | CL21B105KAFNNNE | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 2 | CL05B104KA5NNNC | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C-BTST1, C-BTST2 |
| 2 | CL21A475KAQNNNE | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C-DRV_SUP1, C-REGN1 |
| 6 | TMK325ABJ476MM-P | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C-IN1, C-IN2, C-IN3, C-IN4, C-OUT1, C-OUT2 |
| 3 | HRG3216P-1002-B-T1 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ESR25JZPJ100 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R4, R5 |
| 1 | ESR25JZPJ2R4 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R6 |
| 2 | RMCP2010FT100R | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R7, R8 |
| 1 | ESR25JZPJ105 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R-AC1 |
| 1 | ESR25JZPJ204 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R-AC2 |
| 1 | ESR25JZPJ753 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R-AC3 |
| 1 | MCS1632R005FER | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R-AC_SNS1 |
| 3 | ESR25JZPJ104 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R-CE1, R-LOW1, R-Pull_Down1 |
| 1 | RMCP2010FT100R | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R-DRV_REGN1 |
| 1 | CPF0805B25KE1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R-FB_Bot1 |
| 1 | RNCF0805BTE250K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R-FB_Top1 |
| 1 | CRCW080540K0FKEA | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R-FSW1 |
| 1 | ERA-3AEB302V | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R-I_Out1 |
| 1 | ERJ-2RKF5231X | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R-T1 |
| 1 | ERA-3AEB303V | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R-T2 |
Charge Controller design files
The KiCad project lives in the UWCubeSat/BMS-EPS-HS2 repository on GitHub; these links point at the commit this page was built from.
Charge Controller: common questions
How big is the Charge Controller PCB?
The Charge Controller measures 99.5 × 99.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Charge Controller?
55 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Charge Controller design files?
From the UWCubeSat/BMS-EPS-HS2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Charge Controller design in my own project?
The repository has no license, so all rights stay with UWCubeSat. Use it as a reference, and ask the author before reusing the design.
More boards in BMS-EPS-HS2
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k