ChargeController3.0
UWCubeSat·BMS-EPS-HS2·hardware/Charge Controller 3.0 Files (Michael_Sky)/ChargeController3.0/ChargeController3.0.kicad_pcb
About the ChargeController3.0 PCB
ChargeController3.0 is an open source PCB design by UWCubeSat, published on GitHub. It is a 2-layer board measuring 95.9 × 90.2 mm, with 91 components from 45 distinct parts.
Other key parts include the BQ25756RRVR, SISH101DN-T1-GE3, SI4122DY-T1-GE3 and BAT46WJ_115. By type, the board carries 26 capacitors, 26 resistors, 11 ICs, 6 transistors, 5 diodes and 4 connectors.
It belongs with the power & battery designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Repository of the HS-2 Battery Management System
Main components on the ChargeController3.0
ChargeController3.0 bill of materials (BOM)
91 components, 45 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ25756RRVR BQ25756ERRVR | IC_BQ25756ERRVR | U1 |
| 5 | SISH101DN-T1-GE3 | SISH | U2, U3, U4, U7, U8 |
| 2 | SI4122DY-T1-GE3 | SI4122. | U5, U6 |
| 3 | BAT46WJ_115 | BAT46WJ115 | U9, U10, U11 |
| 4 | AONS66614 | AON6482 | Q5, Q6, Q7, Q8 |
| 1 | SI2318DS-T1-E3 SOT91P240X110-3N | 2N7002K-7 | Q12 |
| 1 | SOT91P240X110-3N | 2N7002K-7 | Q13 |
| 1 | GND_TEST_01X01_PIN Conn_02x26_Odd_Even | PinSocket_2x26_P2.54mm_Vertical | J1 |
| 1 | 3.3V_PULLUP_01X02_PIN 3.3V_PULLUP_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_02x26_Odd_Even | PinSocket_2x26_P2.54mm_Vertical | J12 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Horizontal | J20 |
| 2 | 5m | R_1206_3216Metric | RR_BATT_SNS1, R_AC_SNS1 |
| 1 | 103AT-2 | 103AT-2 | RT1 |
| 1 | 1M | R_0201_0603Metric | R_AC1 |
| 1 | 40.2k | R_0603_1608Metric | R_AC2 |
| 1 | 60.4k | R_0603_1608Metric | R_AC3 |
| 1 | 249k | R_0402_1005Metric | R_FB1 |
| 1 | 16.2k | R_0603_1608Metric | R_FBG1 |
| 1 | 133k | R_0603_1608Metric | R_FSW_SYNC1 |
| 1 | 16.67k | R_0603_1608Metric | R_ICHG1 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 25k | R_0402_1005Metric | R_ILIM_HIZ1 |
| 1 | 100SP1T1B1M1QEH | SW_100SP1T1B1M1QEH | SW1 |
| 3 | GREEN | LED_0603_1608Metric | D1, D2, D3 |
| 2 | DIOM4336X265N | SS26 | D4, D5 |
| 1 | IHLP6767GZER100M01 | IND_IHLP6767GZER100M01 | L1 |
| 4 | 100nF | C_0402_1005Metric | C1, C9, C10, C11 |
| 3 | 4.7U 4.7u | C_0603_1608Metric | C3, C7, C22 |
| 7 | 100N 100n | C_0402_1005Metric | C4, C14, C16, C19, C20, C25, C27 |
| 3 | 10u | CGA6P1X7R1N106K250AC | C5, C8, C21 |
| 1 | 47U 47u | C_0603_1608Metric | C6 |
| 1 | 56U 10u | CGA6P1X7R1N106K250AC | C12 |
| 4 | 56U 100u | T520D107 | C13, C17, C18, C24 |
| 2 | 470N 470n | C_0402_1005Metric | C15, C26 |
| 1 | 1u | C_0201_0603Metric | C23 |
| 4 | 1M | R_0201_0603Metric | R1, R2, R3, R5 |
| 5 | 10 | R_0603_1608Metric | R4, R11, R12, R14, R30 |
| 1 | 330k | R_1206_3216Metric | R6 |
| 1 | 470k | R_1206_3216Metric | R7 |
| 4 | 1M | R_0402_1005Metric | R8, R9, R10, R15 |
| 1 | 400k | R_0805_2012Metric | R13 |
| 6 | 10K 10k | R_0603_1608Metric | R16, R17, R19, R20, R21, R22 |
| 1 | 10K 1M | R_0402_1005Metric | R18 |
| 1 | 200k | R_0402_1005Metric | R23 |
| 1 | 30.1K 30.1k | R_0402_1005Metric | R24 |
| 1 | 5.23K 5.23k | R_0603_1608Metric | R25 |
ChargeController3.0 design files
The KiCad project lives in the UWCubeSat/BMS-EPS-HS2 repository on GitHub; these links point at the commit this page was built from.
ChargeController3.0: common questions
How big is the ChargeController3.0 PCB?
The ChargeController3.0 measures 95.9 × 90.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ChargeController3.0?
91 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ChargeController3.0 design files?
From the UWCubeSat/BMS-EPS-HS2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ChargeController3.0 design in my own project?
The repository has no license, so all rights stay with UWCubeSat. Use it as a reference, and ask the author before reusing the design.
More boards in BMS-EPS-HS2
Earlier revisions in the repo: ChargeController2.0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k