Modular pwm dac LTC6992 REV1
UWCubeSat·HS1_Motor_Test·Modular_pwm_dac_LTC6992/Modular_pwm_dac_LTC6992_REV1.kicad_pcb
About the Modular pwm dac LTC6992 REV1 PCB
Modular pwm dac LTC6992 REV1 is an open source PCB design by UWCubeSat, published on GitHub under the MIT license. It is a 2-layer board measuring 52.8 × 12.6 mm, with 15 components from 11 distinct parts.
Other key parts include the LTC6992-1 (Rev. D). By type, the board carries 7 resistors, 3 connectors, 3 capacitors and 1 IC.
It belongs with the robotics & motion designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
BLDC motor driver for testing HS1 RW motors
Main components on the Modular pwm dac LTC6992 REV1
Modular pwm dac LTC6992 REV1 bill of materials (BOM)
15 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC6992-1 (Rev. D) | DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J2 |
| 2 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 1 | 10k | oldpot | RV1 |
| 3 | 0.1u | C_0603_1608Metric | C1, C2, C10 |
| 1 | 102k | R_0603_1608Metric | R1 |
| 1 | 619k | R_0603_1608Metric | R12 |
| 1 | 976k | R_0603_1608Metric | R13 |
| 1 | 50k | R_0603_1608Metric | R14 |
| 2 | 1.25k | R_0603_1608Metric | R15, R16 |
| 1 | 40k | R_0603_1608Metric | R17 |
Modular pwm dac LTC6992 REV1 design files
The KiCad project lives in the UWCubeSat/HS1_Motor_Test repository on GitHub; these links point at the commit this page was built from.
Modular pwm dac LTC6992 REV1: common questions
How big is the Modular pwm dac LTC6992 REV1 PCB?
The Modular pwm dac LTC6992 REV1 measures 52.8 × 12.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Modular pwm dac LTC6992 REV1?
15 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Modular pwm dac LTC6992 REV1 design files?
From the UWCubeSat/HS1_Motor_Test repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Modular pwm dac LTC6992 REV1 design in my own project?
Yes, under the terms of its MIT license, which UWCubeSat chose for the repository.
More boards in HS1_Motor_Test
Single driver LTC6992(Rev1)
UWCubeSat
58.9 × 47 mm40 parts2LMIT1Single driver LTC6992
UWCubeSat
43.1 × 23.5 mm39 parts2LMIT1TI MSP430/CC
MSP430 Breakout
UWCubeSat
63.5 × 63.5 mm35 parts2LMIT1Modular single driver Driver
UWCubeSat
64.4 × 30.6 mm22 parts2LMIT1Modular single driver Regulator
UWCubeSat
31.5 × 13.2 mm9 parts2LMIT1
Earlier revisions in the repo: Modular_pwm_dac_LTC6992
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979