Modular single driver Driver
UWCubeSat·HS1_Motor_Test·Modular_single_driver_Driver/Modular_single_driver_Driver.kicad_pcb
About the Modular single driver Driver PCB
Modular single driver Driver is an open source PCB design by UWCubeSat, published on GitHub under the MIT license. It is a 2-layer board measuring 64.4 × 30.6 mm, with 22 components from 13 distinct parts.
Other key parts include the DRV10970. By type, the board carries 12 resistors, 5 capacitors, 3 connectors, 1 IC and 1 switch.
It belongs with the robotics & motion designs in this gallery.
From the project
BLDC motor driver for testing HS1 RW motors
In the case that a switch is not installed, reference the silkscreened labels inside of the switch footprint when making connections to ensure accurate pin identificaiton. In the default configuration, FR and BRKMOD are pulled low while DAA and CMTMOD are left floating.
Main components on the Modular single driver Driver
Modular single driver Driver bill of materials (BOM)
22 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV10970 | HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x4.68mm_ThermalVias | U3 |
| 1 | Conn_02x02_Counter_Clockwise | PinHeader_2x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x08_Male | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SW_DIP_x06 | DIP762W56P254L1772H585Q12 | SW1 |
| 1 | 10uF | C_0603_1608Metric | C5 |
| 1 | 2.2uF | C_0603_1608Metric | C6 |
| 2 | 1uF | C_0603_1608Metric | C7, C8 |
| 1 | 0.1uF | C_0603_1608Metric | C9 |
| 2 | 10k | R_0603_1608Metric | R2, R3 |
| 1 | 24k | R_0603_1608Metric | R6 |
| 5 | 3.3k | R_0603_1608Metric | R7, R8, R9, R10, R11 |
| 4 | 100k | R_0603_1608Metric | R18, R19, R20, R21 |
Modular single driver Driver design files
The KiCad project lives in the UWCubeSat/HS1_Motor_Test repository on GitHub; these links point at the commit this page was built from.
Modular single driver Driver: common questions
How big is the Modular single driver Driver PCB?
The Modular single driver Driver measures 64.4 × 30.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Modular single driver Driver?
22 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Modular single driver Driver design files?
From the UWCubeSat/HS1_Motor_Test repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Modular single driver Driver design in my own project?
Yes, under the terms of its MIT license, which UWCubeSat chose for the repository.
More boards in HS1_Motor_Test
Single driver LTC6992(Rev1)
UWCubeSat
58.9 × 47 mm40 parts2LMIT1Single driver LTC6992
UWCubeSat
43.1 × 23.5 mm39 parts2LMIT1TI MSP430/CC
MSP430 Breakout
UWCubeSat
63.5 × 63.5 mm35 parts2LMIT1Modular pwm dac LTC6992 REV1
UWCubeSat
52.8 × 12.6 mm15 parts2LMIT1Modular single driver Regulator
UWCubeSat
31.5 × 13.2 mm9 parts2LMIT1
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979