HardLabs

Zx sizif-512-wifi

UzixLS·zx-sizif-512-wifi·pcb/sizif512-wifi.kicad_pcb

Zx sizif-512-wifi PCB layout, top view — open source ESP8266 board by UzixLS

About the Zx sizif-512-wifi PCB

Zx sizif-512-wifi is an open source ESP8266 PCB design by UzixLS, published on GitHub. It is a 2-layer board measuring 21.9 × 29.5 mm, with 11 components from 9 distinct parts.

Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the AMS1117-3.3. By type, the board carries 4 resistors, 3 capacitors, 2 ICs, 1 connector and 1 test point.

It belongs with the iot & wireless designs in this gallery.

From the project

WiFi module for Sizif-512

Main components on the Zx sizif-512-wifi

AMS1117-3.3ESP-12E

Zx sizif-512-wifi bill of materials (BOM)

11 components, 9 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
ESP-12E
U2
1
Conn_01x10
J1
1
TestPoint
TP1
2
100n
C1, C3
1
100u
C2
1
47
R1
2
470
R3, R4
1
10k
R5

Zx sizif-512-wifi design files

The KiCad project lives in the UzixLS/zx-sizif-512-wifi repository on GitHub; these links point at the commit this page was built from.

Zx sizif-512-wifi: common questions

What microcontroller does the Zx sizif-512-wifi use?

The Zx sizif-512-wifi is built around the ESP-12E, from the ESP8266 family.

How big is the Zx sizif-512-wifi PCB?

The Zx sizif-512-wifi measures 21.9 × 29.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Zx sizif-512-wifi?

11 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Zx sizif-512-wifi design files?

From the UzixLS/zx-sizif-512-wifi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Zx sizif-512-wifi design in my own project?

The repository has no license, so all rights stay with UzixLS. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Zx sizif-512-wifi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

Similar boards