Industrial hat rpi4
V2gkr·industrial_hat_rpi4
About the Industrial hat rpi4
Industrial hat rpi4 is an open source PCB design by V2gkr, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 52 components from 21 distinct parts.
Other key parts include the MCP2518FD-XQBB, ISO6742, TCAN3413, SP3485EN and B0303S-1W. By type, the board carries 23 resistors, 11 capacitors, 6 ICs, 5 diodes, 4 connectors and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
hat to communicate via rs232, rs485, can fd with galvanic isolation
HAT for Raspberry PI 4 with isolated rs232 , rs485 , CAN-FD
This board was made for personal use with other projects. outputs for manufacturing: 1) gerbers and drill files 2) BOM for jlcpcb store 3) pick and place file
Board capabilities 1) isolated RS232 on standart UART pins (8 , 10) 2) isolated RS485 on additional UART with enable pin (27,28,29) 3) isolated CAN-FD on SPI0 (standard pins with interrupt pin on pin 15)
Main components on the Industrial hat rpi4
Industrial hat rpi4 bill of materials (BOM)
52 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2518FD-XQBB MCP2518FD-xQBB | DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm | U1 |
| 2 | ISO6742 | SOIC-16W_7.5x10.3mm_P1.27mm | U2, U4 |
| 1 | TCAN3413 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | SP3485EN | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | B0303S-1W | Converter_DCDC_Murata_CRE1xxxxxxSC_THT_jlcpcb_pnp_custom | U7 |
| 1 | X322520MSB4SI | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | KH-2.54FH-1X20P-H8.5 | PinSocket_2x20_P2.54mm_Vertical_jlcbpcb_pnp_custom | J1 |
| 1 | C49661 2.54-1*2PFemale | PinSocket_1x02_P2.54mm_Vertical_jlcpcb_pnp_custom | J2 |
| 2 | WJ2EDGRC-5.08-03P-14-00A | PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal | J3, J4 |
| 2 | DSIC01TSGER | SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW1, SW2 |
| 2 | C15771 PESD1CAN,215 | SOT-23 | D1, D4 |
| 2 | LED | LED_0603_1608Metric | D2, D3 |
| 1 | C456094 PESD5V0X1BT,215 | SOT-23-3 | D5 |
| 7 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7 |
| 2 | 1u | C_0603_1608Metric | C8, C9 |
| 2 | 20P 20p | C_0402_1005Metric | C10, C11 |
| 2 | 120 | R_0603_1608Metric | R1, R2 |
| 3 | 10K 10k | R_0603_1608Metric | R3, R14, R15 |
| 14 | 100 | R_0603_1608Metric | R4, R5, R6, R7, R8, R9, R10, R11 +6 |
| 2 | 220 | R_0603_1608Metric | R16, R17 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 680 | R_0603_1608Metric | R22, R23 |
Industrial hat rpi4 design files
The KiCad project lives in the V2gkr/industrial_hat_rpi4 repository on GitHub; these links point at the commit this page was built from.
Industrial hat rpi4: common questions
How big is the Industrial hat rpi4?
The Industrial hat rpi4 measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Industrial hat rpi4?
52 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Industrial hat rpi4 design files?
From the V2gkr/industrial_hat_rpi4 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Industrial hat rpi4 design in my own project?
The repository has no license, so all rights stay with V2gkr. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979