SolarCharger

Vaaxs·solarCharger

SolarCharger PCB layout, top view — open source board by Vaaxs

About the SolarCharger PCB

SolarCharger is an open source PCB design by Vaaxs, published on GitHub. It is a 2-layer board measuring 90 × 60 mm, with 30 components from 25 distinct parts.

Other key parts include the CN3791, TPS61023DRLR and USB-TYPE-C-019. By type, the board carries 11 resistors, 7 capacitors, 3 ICs, 2 connectors, 2 LEDs and 2 inductors.

It belongs with the power & battery designs in this gallery.

From the project

A solar charge controller with MPPT and a 5V USB-C output. You wire a 6V solar panel into one terminal block and a 1S lithium pack into the other, and it charges the pack at up to 2.4A while holding the panel at the voltage where it puts out the most power, then boosts back up to

A solar charge controller with MPPT and a 5V USB-C output. You wire a 6V solar panel into one terminal block and a 1S lithium pack into the other, and it charges the pack at up to 2.4A while holding the panel at the voltage where it puts out the most power, then boosts back up to 5V for the USB port.

2 layer board, 90 x 60mm, 30 components, done in KiCad 10.

Around 700 million people don't have reliable electricity, but phones are basically everywhere, so a solar charger is one of the few things you can build where the problem and the thing you're making are both real.

SolarCharger, from the project README
From the project README

Main components on the SolarCharger

SolarCharger bill of materials (BOM)

30 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CN3791
CONSONANCE(上海如韵)
U1
1
TPS61023DRLR
TI(德州仪器)
U2
1
USB-TYPE-C-019
USB-C 16P
DEALON(德艺隆)
U3
1
AOD4185
Alpha & Omega
Q1
2
WJ25C-B-7.62-02P-13-00A
WJ25C-B-2P
KANGNEX(康奈克斯电气)
P1, P2
1
SSSS811101
OS102011MS2Q
ALPSALPINE(阿尔卑斯阿尔派)
SW1
1
KT-0603R
KENTO
LED1
1
发光二极管(黄绿色)
LED (yellow-green)
LED2
1
SS34
SS34_C8678
MDD(辰达半导体)
D1
1
SWPA4030S100MT
10uH SRN8040TA-100M
Sunlord(顺络)
L1
1
SMNR4020-2.2UH
2.2uH NR4018T2R2M
SXN(顺翔诺)
L2
1
100nF
C1
1
220nF
C2
1
22uF
C5
2
10uF/25V
C6, C7
1
22uF
C8
1
10uF
C9
1
357k
R1
2
100k
R2, R15
2
1k
R3, R4
Show 5 more
QtyPartRefs
1
0.05R
R5
2
56k
R9, R16
1
100K
100k
R12
1
750k
R14
1
120R
R17

SolarCharger design files

The KiCad project lives in the Vaaxs/solarCharger repository on GitHub; these links point at the commit this page was built from.

SolarCharger: common questions

How big is the SolarCharger PCB?

The SolarCharger measures 90 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SolarCharger?

30 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SolarCharger design files?

From the Vaaxs/solarCharger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SolarCharger design in my own project?

The repository has no license, so all rights stay with Vaaxs. Use it as a reference, and ask the author before reusing the design.

Similar boards