59 open source boards using the TPS61023DRLR

Real designs built with the TPS61023DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

59 boardsClear filters|Most starred

How designs wire the TPS61023DRLR

Read from the KiCad layouts of 45 open source designs, one per repository: what each pin of the TPS61023DRLR connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a inductor on 43 of 45 designs, most often 1 µH (then 2.2 µH).
  • The FB pin has a resistor to GND on 41 of 45 designs, most often 100 kΩ (then 200 kΩ).
  • The VOUT pin has a decoupling capacitor on 39 of 45 designs, most often 22 µF (then 100 nF).
  • The FB pin has a pull-up to 5V on 36 of 45 designs, most often 732 kΩ (then 750 kΩ).
FBpin 1Connected to: Signal 96%
  • Resistor to GND on 91% · 100 kΩ (33), 200 kΩ (1), 120 kΩ (1)
  • Pull-up to 5V on 80% · 732 kΩ (21), 750 kΩ (4), 453 kΩ (1)
ENpin 2Connected to: The microcontroller 22% · 3.3V 27%
  • Capacitor to GND on 40% · 10 µF (14), 22 µF (8), 100 nF (6)
  • Resistor to GND on 33% · 100 kΩ (13), 1 MΩ (1), 0 Ω (1)
VINpin 3Connected to: VSYS 62% · a signal 31%
  • Decoupling capacitor on 76% · 10 µF (25), 22 µF (17), 100 nF (13)
  • Inductor on 64% · 1 µH (20), 2.2 µH (2), 4.7 µH (1)
GNDpin 4Connected to: GND 91%
SWpin 5Connected to: Signal 98%
  • Inductor on 96% · 1 µH (27), 2.2 µH (5), 4.7 µH (2)
VOUTpin 6Connected to: 5V 78% · a signal 20%
  • Decoupling capacitor on 87% · 22 µF (52), 100 nF (8), 10 µF (8)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MAX14866 PMOD by kelu124, Weather station by Invactive, OpenIEMA by aaravjhamb and Phone board by JamesTwallin.

The TPS61023DRLR in open source designs

The gallery holds 59 open source boards using the TPS61023DRLR from 45 GitHub repositories; a typical one measures about 65 × 54 mm and carries around 84 components.

59% use four copper layers or more, and 32% carry an open source license.

The most starred is MAX14866 PMOD by kelu124.

Microcontrollers on boards using the TPS61023DRLR

TPS61023DRLR: common questions

Where can I find a TPS61023DRLR reference design?

Each of the 59 boards on this page is a real design using the TPS61023DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS61023DRLR SW pin connected?

The SW pin has a inductor on 43 of 45 designs, most often 1 µH (then 2.2 µH). Counted from the KiCad layouts of 45 open source designs using the TPS61023DRLR.

What resistor goes on the TPS61023DRLR FB pin?

The FB pin has a resistor to GND on 41 of 45 designs, most often 100 kΩ (then 200 kΩ). Counted from the KiCad layouts of 45 open source designs using the TPS61023DRLR.

What decoupling capacitors do designs use on the TPS61023DRLR VOUT pin?

The VOUT pin has a decoupling capacitor on 39 of 45 designs, most often 22 µF (then 100 nF). Counted from the KiCad layouts of 45 open source designs using the TPS61023DRLR.

What parts are used alongside the TPS61023DRLR?

The USBLC6-2SC6, BQ24074RGTR, BQ24073RGTR, TP4056-42-ESOP8 and TPD4E05U06DQAR appear in the most repositories here.

Which microcontrollers do boards using the TPS61023DRLR use?

Most are built on ESP32 (24), RP2040/RP2350 (11), STM32 (6) and AVR/Arduino (3).

How big is a typical board using the TPS61023DRLR?

The median is 65 × 54 mm, and 41% are two-layer designs.

What is the most popular open source board using the TPS61023DRLR?

By GitHub stars, MAX14866 PMOD by kelu124, with 8 stars.

Can I simulate one of these boards using the TPS61023DRLR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part