EC60 origin
vadikgo·EC60_origin·PCB/Rev_1_1_1/EC60-Rev_1_1_1.kicad_pcb
About the EC60 origin PCB
EC60 origin is an open source STM32 PCB design by vadikgo, published on GitHub under the MIT license. It is a 4-layer board measuring 285 × 94.6 mm, with 51 components from 18 distinct parts.
Its main chip is the STM32F401CBUX, from the STM32 family. Other key parts include the 74HC4051, OPA350 and XC6206PXXXMR. By type, the board carries 28 resistors, 13 capacitors, 5 ICs, 1 crystal, 1 connector and 1 fuse.
From the project
Open source universal 60% Electrostatic Capacitive PCB.
Open source universal 60% Electrostatic Capacitive PCB.
This project is a continuation of my development of open source EC boards.
The supported layout options are the following:
Mapping is purely for demonstration purposes, remapping of all keys is supported. ## Technical information
- Layout size: 60% (GH60 outline and mounting points, see pictures below) - Compatible switches: EC switches (Topre and NIZ) - Microcontroller: STM32F401 - Connector: USB-C JST connector for daughterboard - Firmware compatibility: QMK (with VIA/VIAL support) - Protection hardware (on all connection methods)…

Main components on the EC60 origin
EC60 origin bill of materials (BOM)
51 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F401CBUX STM32F401CBUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 2 | 74HC4051 | TSSOP16 | U2, U4 |
| 1 | OPA350 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | XC6206PXXXMR XC6206PxxxMR | SOT-23 | U5 |
| 1 | C907975 8 MHz | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | C145956 JST | JST-SR-4 | J1 |
| 1 | 500MA 500mA | Fuse_1206_3216Metric | F1 |
| 1 | TYPEC-304YSSW-ACP16 | TYPEC-304YSSW-ACP16 | USB1 |
| 1 | PRTR5V0U2X | SOT-143 | D1 |
| 1 | 4.7U 4.7u | C_0402_1005Metric | C1 |
| 3 | 1u | C_0402_1005Metric | C2, C3, C13 |
| 8 | 100N 100n | C_0402_1005Metric | C4, C5, C6, C7, C8, C9, C11, C12 |
| 1 | 220P 220p | C_0402_1005Metric | C10 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 5 | 100 | R_0402_1005Metric | R3, R4, R5, R6, R7 |
| 17 | 100K 100k | R_0402_1005Metric | R8, R9, R10, R11, R12, R13, R14, R15 +9 |
| 1 | 1k | R_0402_1005Metric | R17 |
| 3 | 10K 10k | R_0402_1005Metric | R26, R27, R28 |
EC60 origin design files
The KiCad project lives in the vadikgo/EC60_origin repository on GitHub; these links point at the commit this page was built from.
EC60 origin: common questions
What microcontroller does the EC60 origin use?
The EC60 origin is built around the STM32F401CBUX, from the STM32 family.
How big is the EC60 origin PCB?
The EC60 origin measures 285 × 94.6 mm, has 4 copper layers and is 1.59 mm thick.
How many components are on the EC60 origin?
51 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EC60 origin design files?
From the vadikgo/EC60_origin repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EC60 origin design in my own project?
Yes, under the terms of its MIT license, which vadikgo chose for the repository.
Can I test firmware for the EC60 origin without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k