Taptempo box

Valleeh·taptempo-box·smd-pcb/kicad/taptempo-smd.kicad_pcb

Taptempo box PCB layout, top view — open source AVR/Arduino board by Valleeh

About the Taptempo box PCB

Taptempo box is an open source AVR/Arduino PCB design by Valleeh, published on GitHub under the MIT license. It is a 2-layer board measuring 52 × 70 mm, with 41 components from 24 distinct parts.

Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the CH340C, AMS1117-5.0 and PC817C. By type, the board carries 14 capacitors, 9 resistors, 8 connectors, 5 ICs, 4 diodes and 1 crystal.

It belongs with the audio designs in this gallery.

From the project

Tap-tempo box: MIDI clock + switched tempo outputs, ATmega328P, perfboard and JLCPCB SMD versions, 3D-printed enclosure

Eine 2-lagige Platine (52 × 70 mm), die JLCPCB herstellt und mit den kleinen SMD-Bauteilen bestückt. Der Arduino Nano ist nicht mehr aufgesteckt, seine Schaltung sitzt direkt auf der Platine: ATmega328P-AU, USB-Chip CH340C, USB-C-Buchse und 5-V-Regler. Die Pinbelegung ist genau wie bei der Nano-Version. Die bisherige Firmware läuft deshalb unverändert, in der Arduino-IDE wählst du einfach „Arduino Nano“.

Taptempo box, from the project README
From the project README

Main components on the Taptempo box

Taptempo box bill of materials (BOM)

41 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328P-AU
ATmega328P-AU
U1
1
CH340C
U2
1
AMS1117-5.0
U3
2
PC817C
U4, U5
1
16MHZ
16MHz
Y1
1
C165948
USB-C (TYPE-C-31-M-12)
J1
1
9V DC (PJ-102AH), Minus innen
J2
1
3.5mm TRS (SJ1-3523N)
J3
1
OLED (5V SDA SCL GND)
J4
1
Drehgeber (A GND B SW GND)
J5
1
TAP (TAP GND)
J6
1
MIDI DIN (4, 2=GND, 5)
J7
1
ISP (Bootloader)
J8
2
SS14
D1, D2
1
C2297
LED_G (PWR)
D3
1
C2286
LED_R (L, D13)
D10
2
10UF
10uF
C1, C16
1
22UF
22uF
C2
2
12PF
12pF
C10, C11
9
100NF
100nF
C12, C13, C14, C15, C20, C21, C22, C30 +1
Show 4 more
QtyPartRefs
2
5.1K
5.1k
R1, R2
2
1k
R3, R11
1
10K
10k
R10
4
220
R20, R21, R30, R31

Taptempo box design files

The KiCad project lives in the Valleeh/taptempo-box repository on GitHub; these links point at the commit this page was built from.

Taptempo box: common questions

What microcontroller does the Taptempo box use?

The Taptempo box is built around the ATMEGA328P-AU, from the AVR/Arduino family.

How big is the Taptempo box PCB?

The Taptempo box measures 52 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Taptempo box?

41 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Taptempo box design files?

From the Valleeh/taptempo-box repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Taptempo box design in my own project?

Yes, under the terms of its MIT license, which Valleeh chose for the repository.

Can I test firmware for the Taptempo box without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards