7 open source boards using the PC817C
Real designs built with the PC817C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Smu main
PaulBichl
160 × 100 mm240 parts4LNo license1ESP32
Homey
jadam3k
99 × 90 mm95 parts2LNo license0STM32
GeoLock
sudo-junkie
75.1 × 62.9 mm91 parts2LGPL-2.00ESP32
D03-MAIN-CTRL
byhabibi
160 × 115 mm59 parts2LNo license0AVR/Arduino
Taptempo box
Valleeh
52 × 70 mm41 parts2LMIT0ESP32
Estacao de Ignicao (SMD) - LoRa 433 MHz
Serra-Rocketry
85 × 70 mm29 parts2LGPL-3.00D03-IO-PWR
byhabibi
180 × 130 mm23 parts2LNo license0
How designs wire the PC817C
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the PC817C connects to, and the resistors, capacitors and other passives placed on it.
- The AN pin has a series resistor on 4 of 6 designs, most often 680 Ω (then 20 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ANpin 1 | Connected to: Signal 83% · GND 17% |
|
| CATpin 2 | Connected to: GND 50% · a signal 50% |
|
| COLpin 4 | Connected to: Signal 83% · GND 17% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Smu main by PaulBichl, D03-IO-PWR by byhabibi, Homey by jadam3k and Estacao de Ignicao (SMD) - LoRa 433 MHz by Serra-Rocketry.
The PC817C in open source designs
The gallery holds 7 open source boards using the PC817C from 6 GitHub repositories; a typical one measures about 99 × 90 mm and carries around 59 components.
86% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Smu main by PaulBichl.
Parts used alongside the PC817C
Microcontrollers on boards using the PC817C
What boards using the PC817C are built for
PC817C: common questions
Where can I find a PC817C reference design?
Each of the 7 boards on this page is a real design using the PC817C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the PC817C AN pin?
The AN pin has a series resistor on 4 of 6 designs, most often 680 Ω (then 20 kΩ). Counted from the KiCad layouts of 6 open source designs using the PC817C.
Which microcontrollers do boards using the PC817C use?
Most are built on ESP32 (3), STM32 (2) and AVR/Arduino (1).
How big is a typical board using the PC817C?
The median is 99 × 90 mm, and 86% are two-layer designs.
What is the most popular open source board using the PC817C?
By GitHub stars, Smu main by PaulBichl, with 1 stars.
Can I simulate one of these boards using the PC817C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.