Jtag adapter

valletw·jtag-adapter·kicad/jtag-adapter.kicad_pcb

Jtag adapter PCB layout, top view — open source board by valletw

About the Jtag adapter PCB

Jtag adapter is an open source PCB design by valletw, published on GitHub under the MIT license. It is a 4-layer board measuring 70.1 × 30.5 mm, with 27 components from 22 distinct parts.

Other key parts include the USBLC6-2P6 and CP2102-GMR. By type, the board carries 10 connectors, 5 capacitors, 5 resistors, 3 diodes, 2 ICs and 1 switch.

It belongs with the usb & debug tools designs in this gallery.

From the project

JTAG / SWD adapter

This project provide SWD/JTAG adaptation between different type of connector to support multiple probe with standard and custom pinout on a board under test.

The board is composed of multiple connectors interconnected between each others in order to provide different type of probe to your board under test.

- SEGGER 20-pins - ST-Link V2 Mini - ARM Cortex 10-pins - ARM Cortex 20-pins (without trace) - STMicroelectronics STDC14 - Xilinx 14-pins - TagConnect TC2030 (pogo pins cable) - TagConnect TC2050 (pogo pins cable)

Jtag adapter, from the project README
From the project README

Main components on the Jtag adapter

Jtag adapter bill of materials (BOM)

27 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2P6
STMicroelectronics
U201
1
CP2102-GMR
CP2102N
SKYWORKS/SILICON LABS
U202
1
PZ254V-12-6P
TC2030-IDC
XFCN
J101
1
PZ254V-12-10P
TC2050-IDC
XFCN
J102
1
PZ254V-11-03P
VCOM
XFCN
J103
1
PZ127VS-12-10-H10-A38
ARM Cortex 10P
XFCN
J104
1
C41376042
ARM Cortex 20P
hanxia
J105
1
PM254-2-10-W-8.5
SEGGER
HCTL
J106
1
PZ200-2-07-S
Xilinx 14P
HCTL
J108
1
DZ127S-22-14-55
STM STDC14
DEALON
J109
1
PM254-2-05-W-8.5
ST Link V2 Mini
HCTL
J112
1
GT-USB-7010ASV
USB_C_Receptacle_USB2.0_16P
G-Switch
J201
1
TS-1187A-B-A-B
RST
XKB Connection
SW101
1
SMF5.0A
SMF5V0A
hongjiacheng
D201
2
TPD1E05U06DPYR
TPD1E05U06
Texas Instruments
D202, D203
1
BLM18PG121SN1D
Ferrite Beads
Murata Electronics
L201
3
CL05B104KO5NNNC
100n
Samsung Electro-Mechanics
C101, C202, C204
2
CL10A475KO8NNNC
4.7u
Samsung Electro-Mechanics
C201, C203
1
0402WGF2202TCE
22k
UNI-ROYAL(Uniroyal Elec)
R201
1
0402WGF4702TCE
47k
UNI-ROYAL(Uniroyal Elec)
R202
Show 2 more
QtyPartRefs
1
0402WGF1001TCE
1k
UNI-ROYAL(Uniroyal Elec)
R203
2
0402WGF5101TCE
5.1k
UNI-ROYAL(Uniroyal Elec)
R204, R205

Jtag adapter design files

The KiCad project lives in the valletw/jtag-adapter repository on GitHub; these links point at the commit this page was built from.

Jtag adapter: common questions

How big is the Jtag adapter PCB?

The Jtag adapter measures 70.1 × 30.5 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Jtag adapter?

27 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Jtag adapter design files?

From the valletw/jtag-adapter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Jtag adapter design in my own project?

Yes, under the terms of its MIT license, which valletw chose for the repository.

Similar boards