Cp2104-pd source
vanbwodonk·cp2104-pd-source·Hardware/cp2104-pd-source-v01/cp2104-pd-source-v01.kicad_pcb
About the Cp2104-pd source PCB
Cp2104-pd source is an open source PCB design by vanbwodonk, published on GitHub. It is a 2-layer board measuring 30.4 × 20.8 mm, with 20 components from 13 distinct parts.
Other key parts include the CP2104 and LDR6023C. By type, the board carries 8 capacitors, 8 resistors, 2 ICs and 2 transistors.
It belongs with the usb & debug tools and power & battery designs in this gallery.
From the project
Type C USB serial CP2104 as USB-PD source
Pull LDR6023C library from Easyeda with python library easyeda2kicad. Run terminal inside kicad project folder, then run this command
Main components on the Cp2104-pd source
Cp2104-pd source bill of materials (BOM)
20 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2104 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | LDR6023C | SSOP-16_L5.0-W4.4-P0.65-LS6.4-BL | U2 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 2 | 1uF | C_0603_1608Metric | C1, C3 |
| 1 | 4.7uF | C_0603_1608Metric | C2 |
| 1 | 1nF | C_0603_1608Metric | C4 |
| 1 | 100nF | C_0603_1608Metric | C5 |
| 3 | 22uF | C_1206_3216Metric | C6, C7, C8 |
| 2 | 470 | R_0603_1608Metric | R1, R2 |
| 2 | 100 | R_0603_1608Metric | R3, R4 |
| 2 | 10K | R_0603_1608Metric | R5, R6 |
| 1 | 36K | R_0603_1608Metric | R7 |
| 1 | 12K | R_0603_1608Metric | R8 |
Cp2104-pd source design files
The KiCad project lives in the vanbwodonk/cp2104-pd-source repository on GitHub; these links point at the commit this page was built from.
Cp2104-pd source: common questions
How big is the Cp2104-pd source PCB?
The Cp2104-pd source measures 30.4 × 20.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cp2104-pd source?
20 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cp2104-pd source design files?
From the vanbwodonk/cp2104-pd-source repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cp2104-pd source design in my own project?
The repository has no license, so all rights stay with vanbwodonk. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k