Pihat cooling
vanbwodonk·pihat-cooling·PCB/pihat_cooling.kicad_pcb
About the Pihat cooling PCB
Pihat cooling is an open source PCB design by vanbwodonk, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 65 × 56 mm, with 36 components from 27 distinct parts.
Other key parts include the LM2596S-5. By type, the board carries 12 resistors, 9 diodes, 4 transistors, 3 connectors, 3 capacitors and 2 switches.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
Raspberry Pi Hat with fan controller and external power supply
Raspberry Pi Hat with fan controller and external power supply. Raspberry pi need 5 Volt 15 watt power supply, this Pi Hat can replace it with 9/12 Volt power supply 18 watt or more. PCB is design with KiCad 5.1.
1. Wide range DC power input up to 40 Volt (or battery for my application).
2. Fan controller with switchable 5 volt or direct DC in supply. Change J2 jumper close to pi header for 5 Volt fan supply or jumper close to button for direct DC supply. Usually pi fan is for 5 Volt, but i try 5 volt fan with 12 volt battery is no problem at all.

Main components on the Pihat cooling
Pihat cooling bill of materials (BOM)
36 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S-5 | TO-263-5_TabPin3 | U1 |
| 1 | Fan | fan_30mm | M1 |
| 2 | AO3401A | SOT-23 | Q1, Q3 |
| 1 | MMBT3906 | SOT-23 | Q2 |
| 1 | MMBT3904 | SOT-23 | Q4 |
| 1 | Barrel_Jack | BarrelJack_Wuerth_6941xx301002 | J1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | Shutdown | SW_PUSH_6mm | SW1 |
| 1 | Reboot | SW_PUSH_6mm | SW2 |
| 2 | 5V1 | D_MiniMELF | D1, D6 |
| 2 | 1N4007 | D_SMA | D2, D3 |
| 1 | 1N5820 | D_SMA | D7 |
| 1 | LD_Thermal | LED_1206_3216Metric | D8 |
| 1 | LED_12V | LED_1206_3216Metric | D9 |
| 1 | LD_5V | LED_1206_3216Metric | D10 |
| 1 | D4148 | D_MiniMELF | D11 |
| 1 | 33uF | L_Vishay_IHLP-2020 | L1 |
| 2 | CP | CP_Radial_D7.5mm_P2.50mm | C1, C2 |
| 1 | 100nF | C_0805_2012Metric | C3 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100K | D_0805_2012Metric | R1, R4 |
| 1 | 2K2 | D_0805_2012Metric | R2 |
| 2 | 1K | D_0805_2012Metric | R3, R5 |
| 1 | 5K | D_0805_2012Metric | R6 |
| 1 | 3K | D_0805_2012Metric | R7 |
| 3 | 100 | D_0805_2012Metric | R8, R9, R10 |
| 2 | 10K | D_0805_2012Metric | R11, R12 |
Pihat cooling design files
The KiCad project lives in the vanbwodonk/pihat-cooling repository on GitHub; these links point at the commit this page was built from.
Pihat cooling: common questions
How big is the Pihat cooling PCB?
The Pihat cooling measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pihat cooling?
36 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pihat cooling design files?
From the vanbwodonk/pihat-cooling repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pihat cooling design in my own project?
Yes, under the terms of its GPL-2.0 license, which vanbwodonk chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k