Gitea kicad viewer

Vandewaetere·gitea-kicad-viewer·examples/rp2350-minimal/RPI-RP2350A-MINIMAL_R4-S1.kicad_pcb

Gitea kicad viewer PCB layout, top view — open source RP2040/RP2350 board by Vandewaetere

About the Gitea kicad viewer PCB

Gitea kicad viewer is an open source RP2040/RP2350 PCB design by Vandewaetere, published on GitHub under the MIT license. It is a 2-layer board measuring 52 × 51 mm, with 39 components from 19 distinct parts.

Its main chip is the RP2350A, from the RP2040/RP2350 family. Other key parts include the NCP1117ST33T3G and W25Q128JVSIQ. By type, the board carries 19 capacitors, 9 resistors, 4 connectors, 3 ICs, 2 switches and 1 crystal.

From the project

View KiCad projects in Gitea: interactive schematic, PCB, 3D and BOM right in the file view. No external requests, works for private repos.

A small, real-world KiCad project to try gitea-kicad-viewer with: push this folder to a Gitea repository with the viewer installed and open the .kicadpro (whole project), the .kicadsch or the .kicadpcb`.

This is the official RP2350A QFN-60 Minimal Design Example, revision R4-S1, made by Raspberry Pi Ltd as the reference design that goes with their guide Hardware design with RP2350.

Main components on the Gitea kicad viewer

Gitea kicad viewer bill of materials (BOM)

39 components, 19 distinct parts.

QtyPartRefs
1
RP2350A
U1
1
NCP1117ST33T3G
U2
1
W25Q128JVSIQ
U3
1
12MHz
X1
1
10103594-0001LF
J1
2
TSW-118-07-L-D
J2, J3
1
SM03B-SRSS-TB(LF)(SN)
J4
2
434133025816
SW1, SW2
1
3.3u
L1
3
10u
C1, C5, C19
11
100n
C2, C8, C10, C11, C12, C13, C14, C15 +3
2
15p
C3, C4
2
4.7u
C6, C7
1
4.7u
C9
1
10k
R1
3
1k
R2, R4, R6
1
33
R3
2
27
R7, R8
2
0
R9, R10

Gitea kicad viewer design files

The KiCad project lives in the Vandewaetere/gitea-kicad-viewer repository on GitHub; these links point at the commit this page was built from.

Gitea kicad viewer: common questions

What microcontroller does the Gitea kicad viewer use?

The Gitea kicad viewer is built around the RP2350A, from the RP2040/RP2350 family.

How big is the Gitea kicad viewer PCB?

The Gitea kicad viewer measures 52 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Gitea kicad viewer?

39 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gitea kicad viewer design files?

From the Vandewaetere/gitea-kicad-viewer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Gitea kicad viewer design in my own project?

Yes, under the terms of its MIT license, which Vandewaetere chose for the repository.

Can I test firmware for the Gitea kicad viewer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards