Adaptive agv platform

vantalane·adaptive_agv_platform·design_sources/KiCAD/controller_mainboard_v0_1/controller_mainboard.kicad_pcb

Adaptive agv platform PCB layout, top view — open source AVR/Arduino board by vantalane

About the Adaptive agv platform PCB

Adaptive agv platform is an open source AVR/Arduino PCB design by vantalane, published on GitHub under the MIT license. It is a 4-layer board measuring 200 × 100 mm, with 289 components from 44 distinct parts.

Its main chip is the ATMEGA2560-16A, from the AVR/Arduino family. Other key parts include the ATMEGA16U2-M, HIP4082IBZT, INA180A1IDBVR, TPS5430DDA and USBLC6-4SC6. By type, the board carries 93 capacitors, 89 resistors, 36 diodes, 23 connectors, 17 transistors and 12 ICs.

It belongs with the robotics & motion designs in this gallery.

From the project

Fontys adaptive robotics AGV platform design repository.

Specifications and board information can be found in the "documentation" folder.

Design sources are aptly placed within design_sources folder. These include kicad files, production files and example code.

Necessary files and information regarding ordering, assembly and part sourcing are packaged together with PCB versions.

These files can be found within \ with being version number.

Main components on the Adaptive agv platform

Adaptive agv platform bill of materials (BOM)

289 components, 44 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA2560-16A
ATmega2560-16A
U1
1
ATMEGA16U2-M
ATmega16U2-M
U2
4
HIP4082IBZT
U3, U6, U8, U10
4
INA180A1IDBVR
U4, U7, U9, U11
1
TPS5430DDA
U5
1
USBLC6-4SC6
U12
1
2N7002
Q1
16
IRF3205
Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 +8
2
16MHZ
16MHz
Y1, Y2
1
XT-90
J1
1
XT-60
J2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J3
5
01x08_2.54mm _socket
J4, J5, J6, J9, J10
1
02X18_2.54MM_SOCKET
02x18_2.54mm_socket
J7
1
CONN_01X10_2.54MM_SOCKET
Conn_01x10_2.54mm_socket
J8
4
2P_SCREW_TERM
2P_screw_term
J11, J12, J13, J14
2
02X03_PINHEADER
02x03_pinheader
J16, J19
1
02X02_PINHEADER
02x02_pinheader
J18
4
01X04_JST_PH
01x04_JST_PH
J20, J21, J22, J23
2
XT-60
J24, J25
Show 24 more
QtyPartRefs
1
Fuse 20A
F1
4
5A
F2, F3, F4, F5
1
SW_Push
SW1
1
LED RED
D1
28
40V 5A
D2, D3, D6, D7, D8, D10, D11, D12 +20
2
LED YELLOW
D4, D5
5
LED GREEN
D9, D17, D24, D31, D36
1
GZ2012D101TF
FB1
1
15mA 10uH 1.15Ohm
L1
8
5A 1uH
L2, L3, L5, L6, L7, L8, L9, L10
1
3A 15uH
L4
6
50V 22pF C0G
C1, C2, C9, C10, C92, C93
25
50V 100nF X7R
C3, C5, C6, C8, C11, C13, C15, C17 +17
8
50V 100uF
C4, C27, C30, C33, C34, C46, C59, C72
37
50V 1uF X5R
C7, C12, C14, C16, C18, C19, C20, C21 +29
17
N.C.
C74, C75, C76, C77, C78, C79, C80, C81 +9
30
10k 63mW
R1, R10, R17, R18, R19, R20, R26, R27 +22
20
1k 63mW
R4, R12, R13, R14, R15, R16, R22, R23 +12
11
5.1K 100mW
R5, R6, R54, R55, R56, R57, R58, R59 +3
2
22R 100mW
R7, R8
2
1M 63mW
R9, R11
4
N.C.
R21, R33, R41, R49
4
50m 750mW 1%
R25, R37, R45, R53
16
0R 100mW
R64, R65, R66, R67, R68, R69, R70, R71 +8

Adaptive agv platform design files

The KiCad project lives in the vantalane/adaptive_agv_platform repository on GitHub; these links point at the commit this page was built from.

Adaptive agv platform: common questions

What microcontroller does the Adaptive agv platform use?

The Adaptive agv platform is built around the ATMEGA2560-16A, from the AVR/Arduino family.

How big is the Adaptive agv platform PCB?

The Adaptive agv platform measures 200 × 100 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Adaptive agv platform?

289 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Adaptive agv platform design files?

From the vantalane/adaptive_agv_platform repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Adaptive agv platform design in my own project?

Yes, under the terms of its MIT license, which vantalane chose for the repository.

Can I test firmware for the Adaptive agv platform without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards