Antenna node
vbnbharath·WSN·hardware/antenna_node/antenna_node.kicad_pcb
About the Antenna node PCB
Antenna node is an open source TI MSP430/CC PCB design by vbnbharath, published on GitHub. It is a 4-layer board measuring 102 × 35 mm, with 65 components from 32 distinct parts.
Its main chip is the MSP430FR5739, from the TI MSP430/CC family. Other key parts include the 0896BM15A0001, TC77, TCXO, CC110L and MCP1700. By type, the board carries 28 capacitors, 13 resistors, 8 ICs, 5 inductors, 4 connectors and 2 switches.
It belongs with the rf & radio, iot & wireless and sensors designs in this gallery.
From the project
Wireless Sensor Networks
Main components on the Antenna node
Antenna node bill of materials (BOM)
65 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0896BM15A0001 | 0896BM15A0001E | U1 |
| 1 | TC77 | SOT-23-5 | U2 |
| 1 | TCXO | NT2016SA | U3 |
| 1 | CC110L | QFN-20-1EP_4x4mm_Pitch0.5mm | U4 |
| 1 | MCP1700 | SOT-23 | U5 |
| 1 | LSM6DS3 | ST_LGA_14 | U6 |
| 1 | MSP430FR5739 | TSSOP_38_Pitch0.65mm | U7 |
| 1 | S01-50250500 | S01-50250500 | U8 |
| 1 | Antenna_2port | ANT1204LL05R0915A | A1 |
| 1 | Q_PMOS_GDS | SOT-23_Handsoldering | Q1 |
| 1 | Crystal_Small | R_1210_HandSoldering | Y1 |
| 1 | CONN_01X02 | BC2AAPC | P3 |
| 1 | DIL16 | CHS-08TA | P4 |
| 1 | CONN_01X06 | LPPB061NGCN-RC | P5 |
| 1 | CONN_01X03 | U.FL-COAX | P6 |
| 1 | 1555C2F22GY | 1555CF22 | B1 |
| 2 | SW_PUSH | PTS820J20MSMTRLFS | SW1, SW2 |
| 1 | RED | LED-0603 | D1 |
| 1 | 5.6 nH | R_0603 | L1 |
| 4 | 2.2 kOhm | R_0603 | L2, L3, L4, L5 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100 pF NPO | C_0603 | C1, C23 |
| 1 | 1.8 pF | C_0603 | C2 |
| 16 | 100 nF | C_0603 | C3, C4, C5, C6, C7, C8, C9, C11 +8 |
| 2 | 1000 nF | C_0603 | C10, C22 |
| 3 | 1 nF | C_0603 | C18, C21, C25 |
| 1 | 220 uF | CAP_POL_6p60mm | C20 |
| 1 | 470 nF | C_0603 | C26 |
| 2 | 10 pF | C_0603 | C27, C28 |
| 3 | 56k | R_0603 | R1, R3, R9 |
| 1 | 1 | R_0603 | R2 |
| 6 | 0 | R_0603 | R4, R5, R6, R7, R10, R13 |
| 3 | DNP | R_0603 | R8, R11, R12 |
Antenna node design files
The KiCad project lives in the vbnbharath/WSN repository on GitHub; these links point at the commit this page was built from.
Antenna node: common questions
What microcontroller does the Antenna node use?
The Antenna node is built around the MSP430FR5739, from the TI MSP430/CC family.
How big is the Antenna node PCB?
The Antenna node measures 102 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Antenna node?
65 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Antenna node design files?
From the vbnbharath/WSN repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Antenna node design in my own project?
The repository has no license, so all rights stay with vbnbharath. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Antenna node without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
More boards in WSN
Similar boards
TI MSP430/CC
Pluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0536TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089TI MSP430/CC
Toniebox
toniebox-reverse-engineering
88 × 102 mm11 parts2LNo license36TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33TI MSP430/CC
Elektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029TI MSP430/CC
MSP430 Breadstick - Apple Sauce
upsidedownlabs
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021