30 open source boards using the MCP1700
Real designs built with the MCP1700, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
HeaterMeterPI
CapnBry
94.6 × 46.1 mm63 partsMIT557STM32
MINI4
antonchromjak
65 × 18 mm151 parts4LNo license139ESP32
Lora node esp32 smd GPS
Christophe45
71.1 × 109.2 mm32 parts2LNo license14AVR/Arduino
FRReceiverLVH
shaise
27.5 × 14.5 mm33 parts4LGPL-3.013STM32
CAN-USB-dongle
cvra
45 × 27 mm52 parts2LNo license12STM32
OpenSkySim
shaise
36 × 20 mm33 parts2LLGPL-2.112STM32
Bluz v1
Maniak003
24.9 × 14.9 mm72 parts2LGPL-3.03PIC
Perenquen
supernudo
75.8 × 101 mm90 parts2LNo license1STM32
Alpha spectrometer v1
Maniak003
63.1 × 45 mm134 parts2LNo license0PIC
EkoPuszka
media3-0
72.4 × 45.7 mm75 parts2LMIT0RP2040/RP2350
PCB-PD
Taran-the-Idiot
105 × 103.7 mm69 parts2LMIT0TI MSP430/CC
Antenna node
vbnbharath
102 × 35 mm65 parts4LNo license0STM32
Phaser
cillian64
50 × 95 mm49 parts2LNo license0RP2040/RP2350
Taranium-RP2040
Taran-the-Idiot
39.1 × 26.9 mm39 parts2LMIT0Radar RF
ckflight
42.9 × 24.5 mm138 parts4LGPL-3.055Radar RF
TonyStark2007
42.9 × 24.5 mm138 parts4LGPL-3.015AVR/Arduino
FRReceiverTiny
shaise
27.5 × 14.5 mm33 parts4LGPL-3.013STM32
Bluz Macropixel
Maniak003
27.9 × 17.2 mm65 parts2LGPL-3.03AVR/Arduino
ArduinoController
frep
150 × 80 mm100 parts2LNo license2Gps breakout
vbnbharath
49 × 29 mm34 parts2LNo license0AVR/Arduino
ProgrammableRelayModule4Channel
numato
91 × 82 mm72 parts2LNo license143ESP32
Loranode esp32 V3
Christophe45
53.3 × 101.6 mm26 parts2LNo license14AVR/Arduino
FRReceiver8
shaise
22 × 23 mm25 parts2LGPL-3.013ESP8266
ESPTiny402
tomtor
26.4 × 23.9 mm15 parts2LGPL-3.04AVR/Arduino
ProgrammableRelayModule2Channel
numato
100 × 60 mm64 parts2LNo license143NXP
Grove sensor
samuelclay
50.8 × 50.8 mm43 partsNo license16ESP8266
ESPTiny402-hand-SOT89
tomtor
26.4 × 23.9 mm15 parts2LGPL-3.04ESP8266
ESPTiny402-SOT89
tomtor
26.4 × 23.9 mm15 parts2LGPL-3.04ESP8266
ESPTiny402-SOT89-shove
tomtor
26.4 × 23.9 mm15 parts2LGPL-3.04Simple power supply board
Paa-Kwasi-04
49 × 82 mm21 parts2LNo license0
How designs wire the MCP1700
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the MCP1700 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 15 of 19 designs, most often 100 nF (then 10 µF).
- The VO pin has a decoupling capacitor on 14 of 19 designs, most often 22 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 95% | — |
| VOpin 2 | Connected to: 3.3V 84% · a signal 16% |
|
| VIpin 3 | Connected to: 3.3V 68% · a signal 32% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HeaterMeterPI by CapnBry, ProgrammableRelayModule2Channel by numato, MINI4 by antonchromjak and Radar RF by ckflight.
The MCP1700 in open source designs
The gallery holds 30 open source boards using the MCP1700 from 21 GitHub repositories; a typical one measures about 49 × 28 mm and carries around 51 components.
79% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is HeaterMeterPI by CapnBry.
Parts used alongside the MCP1700
Microcontrollers on boards using the MCP1700
What boards using the MCP1700 are built for
MCP1700: common questions
Where can I find a MCP1700 reference design?
Each of the 30 boards on this page is a real design using the MCP1700. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1700 VI pin?
The VI pin has a decoupling capacitor on 15 of 19 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 20 open source designs using the MCP1700.
What decoupling capacitors do designs use on the MCP1700 VO pin?
The VO pin has a decoupling capacitor on 14 of 19 designs, most often 22 µF (then 100 nF). Counted from the KiCad layouts of 20 open source designs using the MCP1700.
What parts are used alongside the MCP1700?
The 5400BL15B050E, ADF4158, ADL5801, Directional_Coupler and HMC431LP4 appear in the most repositories here.
Which microcontrollers do boards using the MCP1700 use?
Most are built on STM32 (7), AVR/Arduino (7), ESP8266 (4) and PIC (2).
How big is a typical board using the MCP1700?
The median is 49 × 28 mm, and 79% are two-layer designs.
What is the most popular open source board using the MCP1700?
By GitHub stars, HeaterMeterPI by CapnBry, with 557 stars.
Can I simulate one of these boards using the MCP1700 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.