Rimjob
About the Rimjob PCB
Rimjob is an open source PCB design by velvia-fifty, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 100 × 100 mm, with 22 components from 18 distinct parts.
By type, the board carries 10 connectors, 4 diodes, 4 resistors and 1 switch.
It belongs with the audio designs in this gallery.
From the project
DIY audio-related projects of questionable quality and dubious utility; delivered in 30 minutes or less or the next one is free
When you download this as a ZIP open AudioThings.kicad_pro, this is a panopticon project that contains the main resources and exists to handle some references that are common. Apparently KiCad and I have some foundational disagreement on how to misuse their software; this is primarily because I'm ignorant, but also they have incorrect opinions.
Use Kicad to drill down into other projects.
Rimjob bill of materials (BOM)
22 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | B2B_CONN OPT EURO | EURORACK Right Angle | J2 |
| 1 | 1-0401FBV0T USB TAD | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Audio In | AMPHENOL_F33B-1A7Q1-E8C08 | J5 |
| 1 | Audio Out | AMPHENOL_F33B-1A7Q1-E8C08 | J6 |
| 1 | UART | CONN_BM03B-SRSS-TBLFSN_JST | J7 |
| 1 | I2C | PinHeader_2x04_P2.54mm_Vertical | J8 |
| 2 | Stereo Jack - SMD HZ | SMD_STEREO_CUI_SJ-3524-SMT_Horizontal | J9, J10 |
| 1 | EXT_INTERFACE_1 | AMPHENOL_SFV30R-4STE1HLF - FFC - 30 RA | J11 |
| 1 | Daughter | AMPHENOL_SFV30R-4STE1HLF - FFC - 30 RA | J14 |
| 3 | PTV09 Pot HZ | Potentiometer_Bourns_PTV09A-2_Single_Horizontal | RV1, RV2, RV3 |
| 1 | Micro Toggle | DPDT Micro SW_1825138-7 | SW1 |
| 1 | 1N4148WS 5V OK | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 1N4148WS 12V OK | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | -12V OK | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | PRSNT | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | 100K 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 10K 500 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 33K 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
Rimjob design files
The KiCad project lives in the velvia-fifty/AudioThings repository on GitHub; these links point at the commit this page was built from.
Rimjob: common questions
How big is the Rimjob PCB?
The Rimjob measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rimjob?
22 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rimjob design files?
From the velvia-fifty/AudioThings repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rimjob design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in AudioThings
MXKeys
202.6 × 128.5 mm164 parts2LCC-BY-NC-4.01
HacKeys
100 × 100 mm151 parts2LCC-BY-NC-4.01
Laundry
100 × 100 mm145 parts2LCC-BY-NC-4.01
Bumpstock
141.8 × 128.5 mm140 parts2LCC-BY-NC-4.01
Zoetrope
30 × 128.5 mm125 parts2LCC-BY-NC-4.01
DEitW
100 × 100 mm98 parts2LCC-BY-NC-4.01
EurorATX
47 × 128.5 mm52 parts2LCC-BY-NC-4.01
Superstitious Acrobat
100 × 94 mm49 parts2LCC-BY-NC-4.01
Connspiracy Theory
100 × 100 mm24 parts2LCC-BY-NC-4.01
THX-4046
100 × 100 mm22 parts2LCC-BY-NC-4.01
Similar boards
OtterCastAudioV2
Ottercast
50 × 49.3 mm216 parts4LMIT665
FunBox
GuitarML
59.7 × 67.5 mm63 parts2LMIT278
Eurorack pmod
apfaudio
35 × 110 mm116 parts4LCERN-OHL-S-2.0239
XassetteAsterisk
SdtElectronics
56 × 56 mm137 parts2LCERN-OHL-W-2.0229
AddOnC
freeDSP
380 × 45 mm97 parts2LCC-BY-SA-4.0222
AddOnA
178 × 39 mm55 parts2LCC-BY-SA-4.0222