Test
Ventratrat·KiCad-proj·Test-Stand/Test.kicad_pcb
About the Test PCB
Test is an open source AVR/Arduino PCB design by Ventratrat, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 75.7 × 61 mm, with 21 components from 17 distinct parts.
Its main chip is the Arduino_Nano_v2.x, from the AVR/Arduino family. Other key parts include the LM741, HX711 and MPXV7002DP. By type, the board carries 6 resistors, 5 capacitors, 4 ICs, 4 connectors, 1 module and 1 transistor.
From the project
KiCAD schematics and layouts I worked on
Main components on the Test
Test bill of materials (BOM)
21 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM741 | SOIC-8_W3.9mm | U1 |
| 1 | ~ | ACS781LLRTR-100U-T | U2 |
| 1 | HX711 | SOP-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | MPXV7002DP | XDCR_MPXV7002DP | U4 |
| 1 | Arduino_Nano_v2.x | Arduino_Nano | A1 |
| 1 | S8550 2TY DNP SOT-23 SMD 0.5A 40V | SOT-23 | Q1 |
| 1 | Conn_01x04_Pin | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | Conn_01x06 | JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J2 |
| 2 | XT90PW-F | XT90_-F | J3, J4 |
| 2 | 10u | Capacitor_4mm_diam_.6mm_pin | C1, C6 |
| 2 | 1u | Capacitor_4mm_diam_.6mm_pin | C3, C4 |
| 1 | 10n | Capacitor_4mm_diam_.6mm_pin | C5 |
| 2 | 100 | R_1watt | R1, R4 |
| 1 | 30000 | R_1watt | R2 |
| 1 | 6000 | R_1watt | R3 |
| 1 | 20000 | R_1watt | R5 |
| 1 | 7500 | R_1watt | R6 |
Test design files
The KiCad project lives in the Ventratrat/KiCad-proj repository on GitHub; these links point at the commit this page was built from.
- LayoutTest-Stand/Test.kicad_pcb
- SchematicTest-Stand/Test.kicad_sch
Test: common questions
What microcontroller does the Test use?
The Test is built around the Arduino_Nano_v2.x, from the AVR/Arduino family.
How big is the Test PCB?
The Test measures 75.7 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Test?
21 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Test design files?
From the Ventratrat/KiCad-proj repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Test design in my own project?
Yes, under the terms of its GPL-3.0 license, which Ventratrat chose for the repository.
Can I test firmware for the Test without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in KiCad-proj
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k