Verakey
Veracles-Hackclub·Verakey
About the Verakey PCB
Verakey is an open source STM32 PCB design by Veracles-Hackclub, published on GitHub. It is a 2-layer board measuring 59 × 20 mm, with 26 components from 17 distinct parts.
Its main chip is the STM32L432KBUX, from the STM32 family. Other key parts include the ATECC608A-MAHDA, USBLC6-2SC6 and TLV75533PDBV. By type, the board carries 9 resistors, 7 capacitors, 4 ICs, 2 connectors, 2 diodes and 1 fuse.
From the project
A custom Yubikey!
It uses the STM32L432KBUx with an ATECC608 for maximum security, and will have the following protocol stack -FIDO2 -U2F -HOTP -PIV
for maximal security. I also added a cool silkscreen.
Main components on the Verakey
Verakey bill of materials (BOM)
26 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L432KBUX STM32L432KBUx | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | ATECC608A-MAHDA | DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | TLV75533PDBV | SOT-23-5 | U4 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_Palconn_UTC16-G | J2 |
| 1 | 500MA 500mA | Fuse_1206_3216Metric | F1 |
| 1 | TESTPOINT_2POLE TestPoint_2Pole | PinHeader_1x02_P1.00mm_Vertical | TP1 |
| 2 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2 |
| 3 | 1UF 1uF | C_0402_1005Metric | C1, C2, C3 |
| 1 | 10UF 10uF | C_0603_1608Metric | C4 |
| 2 | 1UF 1uF | C_0603_1608Metric | C5, C6 |
| 1 | 100NF 100nF | C_0504_1310Metric | C7 |
| 2 | 22 | R_0201_0603Metric | R1, R2 |
| 2 | 5.1K 5.1k | R_0201_0603Metric | R3, R4 |
| 4 | 4.7K 4.7k | R_0402_1005Metric | R5, R6, R7, R8 |
| 1 | 10K 10k | R_0603_1608Metric | R9 |
Verakey design files
The KiCad project lives in the Veracles-Hackclub/Verakey repository on GitHub; these links point at the commit this page was built from.
Verakey: common questions
What microcontroller does the Verakey use?
The Verakey is built around the STM32L432KBUX, from the STM32 family.
How big is the Verakey PCB?
The Verakey measures 59 × 20 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Verakey?
26 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Verakey design files?
From the Veracles-Hackclub/Verakey repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Verakey design in my own project?
The repository has no license, so all rights stay with Veracles-Hackclub. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Verakey without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k