VerticalFarmIB3.github.io
VerticalFarmIB3·VerticalFarmIB3.github.io·inhoud/plantensensor/PCB Plantsensing/soil_moister_air/soil_moister_air.kicad_pcb
About the VerticalFarmIB3.github.io PCB
VerticalFarmIB3.github.io is an open source ESP32 PCB design by VerticalFarmIB3, published on GitHub. It is a 2-layer board measuring 53.3 × 43.2 mm, with 21 components from 14 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 6 connectors, 6 resistors, 3 capacitors, 2 ICs, 2 switches and 2 diodes.
From the project
Vertical farm - IB3 documentation and webpages
Main components on the VerticalFarmIB3.github.io
VerticalFarmIB3.github.io bill of materials (BOM)
21 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1, J2, J6 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | SW_Push | SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW1 |
| 1 | BOOT | SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW2 |
| 1 | RED | LED_0805_2012Metric | D1 |
| 1 | BLUE | LED_0805_2012Metric | D2 |
| 1 | 100n | C_0805_2012Metric | C1 |
| 1 | 10µ | C_0805_2012Metric | C2 |
| 1 | 22µ | C_0805_2012Metric | C3 |
| 4 | 10k | R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | 1k | R_0805_2012Metric | R5, R6 |
VerticalFarmIB3.github.io design files
The KiCad project lives in the VerticalFarmIB3/VerticalFarmIB3.github.io repository on GitHub; these links point at the commit this page was built from.
VerticalFarmIB3.github.io: common questions
What microcontroller does the VerticalFarmIB3.github.io use?
The VerticalFarmIB3.github.io is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the VerticalFarmIB3.github.io PCB?
The VerticalFarmIB3.github.io measures 53.3 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VerticalFarmIB3.github.io?
21 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the VerticalFarmIB3.github.io design files?
From the VerticalFarmIB3/VerticalFarmIB3.github.io repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the VerticalFarmIB3.github.io design in my own project?
The repository has no license, so all rights stay with VerticalFarmIB3. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the VerticalFarmIB3.github.io without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k