IV26 device
VGCH·IV26_device·IV26_board/IV26_board.kicad_pcb
About the IV26 device PCB
IV26 device is an open source ESP8266 PCB design by VGCH, published on GitHub. It is a 2-layer board measuring 38 × 37 mm, with 31 components from 14 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the AMS1117-3.3 and LTV-817S. By type, the board carries 14 resistors, 10 ICs, 4 connectors and 3 capacitors.
From the project
Smart device based on sovet tube IV26
Main components on the IV26 device
IV26 device bill of materials (BOM)
31 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-12E | ESP-12E | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 8 | LTV-817S | SMDIP-4_W9.53mm | U3, U4, U5, U6, U7, U8, U9, U10 |
| 1 | 5V_IN | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 1 | Terminal_1 | TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | J2 |
| 1 | 25V_IN | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J4 |
| 1 | Terminal_2 | TerminalBlock_MaiXu_MX126-5.0-05P_1x05_P5.00mm | J5 |
| 2 | 10uF | C_0805_2012Metric | C1, C2 |
| 1 | 100nF | C_0805_2012Metric | C3 |
| 2 | 1k | R_0805_2012Metric | R1, R2 |
| 8 | 330 | R_0805_2012Metric | R3, R4, R5, R6, R7, R8, R9, R10 |
| 2 | 910 | R_0805_2012Metric | R11, R14 |
| 1 | R_Photo | R_LDR_5.1x4.3mm_P3.4mm_Vertical | R12 |
| 1 | 47k | R_0805_2012Metric | R13 |
IV26 device design files
The KiCad project lives in the VGCH/IV26_device repository on GitHub; these links point at the commit this page was built from.
IV26 device: common questions
What microcontroller does the IV26 device use?
The IV26 device is built around the ESP-12E, from the ESP8266 family.
How big is the IV26 device PCB?
The IV26 device measures 38 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IV26 device?
31 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the IV26 device design files?
From the VGCH/IV26_device repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IV26 device design in my own project?
The repository has no license, so all rights stay with VGCH. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IV26 device without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398