Light switch
VGCH·light_switch·board/light_switch_controller/light_switch_controller.kicad_pcb
About the Light switch PCB
Light switch is an open source ESP8266 PCB design by VGCH, published on GitHub. It is a 2-layer board measuring 99 × 43 mm, with 49 components from 28 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the MOC3052M and LNK306G. By type, the board carries 20 resistors, 8 capacitors, 7 diodes, 5 ICs, 5 connectors and 3 transistors.
It belongs with the iot & wireless designs in this gallery.
From the project
light switch for Home Assistant
Main components on the Light switch
Light switch bill of materials (BOM)
49 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | MOC3052M | DIP-6_W7.62mm | U1, U3, U4 |
| 1 | LNK306G | SOP-8_3.76x4.96mm_P1.27mm | U2 |
| 1 | ESP-12E | ESP-12E | U5 |
| 3 | BT136-600 | TO-252-2 | Q1, Q2, Q3 |
| 1 | input 240V AC | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | CHANNEL 2 | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | CHANNEL 3 | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | CHANNEL 1 | TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | SWITCH | TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | RMB4S | TO-269AA | D1 |
| 2 | UF4005 US1J | D_MELF | D3, D4 |
| 4 | LED | LED_1206_3216Metric | D5, D6, D7, D8 |
| 1 | 1mH | L_Taiyo-Yuden_NR-50xx | L1 |
| 1 | 10uF 400V | CP_Radial_D8.0mm_P3.80mm | C1 |
| 2 | 100n | C_1206_3216Metric | C2, C8 |
| 1 | 10uF 16V | CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C3 |
| 1 | 100uF 16V | CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C4 |
| 3 | 10n | C_1206_3216Metric | C5, C6, C7 |
| 3 | 330 | R_0805_2012Metric | R1, R8, R14 |
| 1 | 2 | R_1206_3216Metric | R2 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 600 | R_0805_2012Metric | R3, R9, R15 |
| 1 | 2k | R_0805_2012Metric | R4 |
| 1 | 2.2k | R_0805_2012Metric | R5 |
| 1 | 1.5k | R_0805_2012Metric | R6 |
| 4 | 470 | R_0805_2012Metric | R7, R18, R19, R20 |
| 3 | 39 | R_1206_3216Metric | R10, R12, R16 |
| 1 | 4.7k | R_0805_2012Metric | R11 |
| 2 | 1k | R_0805_2012Metric | R13, R17 |
Light switch design files
The KiCad project lives in the VGCH/light_switch repository on GitHub; these links point at the commit this page was built from.
Light switch: common questions
What microcontroller does the Light switch use?
The Light switch is built around the ESP-12E, from the ESP8266 family.
How big is the Light switch PCB?
The Light switch measures 99 × 43 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Light switch?
49 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Light switch design files?
From the VGCH/light_switch repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Light switch design in my own project?
The repository has no license, so all rights stay with VGCH. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Light switch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398