Nova-Clock
Vihaan6119·Nova-Clock·PCB/Nova Clock.kicad_pcb
About the Nova-Clock PCB
Nova-Clock is an open source ESP32 PCB design by Vihaan6119, published on GitHub. It is a 2-layer board measuring 90.8 × 48 mm, with 7 components from 4 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 4 switches, 1 IC, 1 connector and 1 buzzer.
It belongs with the iot & wireless designs in this gallery.
From the project
Nova Clock is a desktop alarm clock which uses a Seeed Studio XIAO ESP32-C3. It has a 2.25-inch TFT display, four mechanical keyboard switches, a piezo buzzer and all of these will be on a custom PCB with an enclosure/case where all of these will sit in. The PCB, enclosure, and f
Nova Clock is a desktop alarm clock which uses a Seeed Studio XIAO ESP32-C3. It has a 2.25-inch TFT display, four mechanical keyboard switches, a piezo buzzer and all of these will be on a custom PCB with an enclosure/case where all of these will sit in. The PCB, enclosure, and firmware were all designed as part of the same project so the electronics and the case fit together as one system.

Main components on the Nova-Clock
Nova-Clock bill of materials (BOM)
7 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-DIP | U1 |
| 1 | Conn_01x08_Pin | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 4 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
Nova-Clock design files
The KiCad project lives in the Vihaan6119/Nova-Clock repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Nova Clock.kicad_pcb
- SchematicPCB/Nova Clock.kicad_sch
Nova-Clock: common questions
What microcontroller does the Nova-Clock use?
The Nova-Clock is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Nova-Clock PCB?
The Nova-Clock measures 90.8 × 48 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nova-Clock?
7 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nova-Clock design files?
From the Vihaan6119/Nova-Clock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nova-Clock design in my own project?
The repository has no license, so all rights stay with Vihaan6119. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Nova-Clock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k