IM-PULSE
vinay11hariharan-bit·IM-PULSE·pcb/device_pcb/second_pcb.kicad_pcb
About the IM-PULSE PCB
IM-PULSE is an open source ESP32 PCB design by vinay11hariharan-bit, published on GitHub. It is a 2-layer board measuring 122.3 × 66 mm, with 34 components from 19 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the YAAJ_BlackPill_SWD_Breakout and DS32KHZSN#. By type, the board carries 11 capacitors, 10 connectors, 5 resistors, 3 ICs, 3 diodes and 2 transistors.
From the project
This is a cuff-less Blood Pressure measuring device, based on PTT using ECG signals
Main components on the IM-PULSE
IM-PULSE bill of materials (BOM)
34 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | YAAJ_BlackPill_SWD_Breakout | YAAJ_BluePill_SWD_1 | U1 |
| 1 | DS32KHZSN# DS32KHZSN | SOIC127P1034X267-16N | U2 |
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1_modified | U6 |
| 2 | PNP | TO-92L_HandSolder_modified | Q1, Q2 |
| 2 | Conn_01x10_Socket | PinHeader_1x10_P2.54mm_Vertical | J1, J4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J6 |
| 2 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J7, J9 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 3 | LED | LED_1206_3216Metric | D1, D2, D4 |
| 1 | 470u | CP_Radial_D8.0mm_P3.50mm | C1 |
| 9 | 0.1u | C_0805_2012Metric | C2, C4, C5, C6, C7, C8, C9, C10 +1 |
| 1 | 100u | CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 1k | R_0805_2012Metric | R1 |
| 2 | 10k | R_0805_2012Metric | R2, R4 |
| 2 | 330 | R_0805_2012Metric | R3, R5 |
IM-PULSE design files
The KiCad project lives in the vinay11hariharan-bit/IM-PULSE repository on GitHub; these links point at the commit this page was built from.
IM-PULSE: common questions
What microcontroller does the IM-PULSE use?
The IM-PULSE is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the IM-PULSE PCB?
The IM-PULSE measures 122.3 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IM-PULSE?
34 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IM-PULSE design files?
From the vinay11hariharan-bit/IM-PULSE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IM-PULSE design in my own project?
The repository has no license, so all rights stay with vinay11hariharan-bit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IM-PULSE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k