Breakout-TB67H450FNG
vincentcayadi·breakout-TB67H450FNG
About the Breakout-TB67H450FNG
Breakout-TB67H450FNG is an open source PCB design by vincentcayadi, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 50 mm, with 12 components from 9 distinct parts.
Other key parts include the TB67H450FNG,EL. By type, the board carries 4 resistors, 3 capacitors, 2 connectors, 2 diodes and 1 IC.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
PWM Chopper Type DC Brushed Motor Driver using KiCAD
The TB67H450FNG Breakout/Evaluation Board is a custom-designed board for the Toshiba TB67H450FNG motor driver IC. The datasheet for this component can be found here.
This board is ideal for low-power robotics applications that require minimal torque, with a maximum current rating of 3.0A and a typical current rating of 1.5A. While the board features Surface Mounted Devices (SMD) components, soldering is relatively straightforward, making it accessible to a wide range of users.

Main components on the Breakout-TB67H450FNG
Breakout-TB67H450FNG bill of materials (BOM)
12 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TB67H450FNG,EL | P-HSOP8-0405-1p27-001_TOS | IC1 |
| 1 | Conn_01x06 | PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | Screw_Terminal_01x02 | xt30-f | J2 |
| 2 | LED | led0603 | D1, D2 |
| 1 | 100u | CP_Radial_D8.0mm_P3.50mm | C1 |
| 2 | 0u1 | cap0603 | C2, C3 |
| 1 | 10K | res0603 | R1 |
| 1 | 20 | res0603 | R2 |
| 2 | 470 | res0603 | R3, R4 |
Breakout-TB67H450FNG design files
The KiCad project lives in the vincentcayadi/breakout-TB67H450FNG repository on GitHub; these links point at the commit this page was built from.
- Layoutbreakout-TB67H450FNG.kicad_pcb
- Schematicbreakout-TB67H450FNG.kicad_sch
Breakout-TB67H450FNG: common questions
How big is the Breakout-TB67H450FNG?
The Breakout-TB67H450FNG measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breakout-TB67H450FNG?
12 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Breakout-TB67H450FNG design files?
From the vincentcayadi/breakout-TB67H450FNG repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Breakout-TB67H450FNG design in my own project?
Yes, under the terms of its MIT license, which vincentcayadi chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k