5 open source boards using the TB67H450FNG,EL
Real designs built with the TB67H450FNG,EL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Motor42
zhbi98
42 × 42 mm82 parts4LMIT8STM32
Motor35
zhbi98
35 × 35 mm71 parts4LMIT2Breakout-TB67H450FNG
vincentcayadi
50 × 50 mm12 parts2LMIT0RP2040/RP2350
MD
MUNAKATA-EPC
38 × 37.2 mm37 parts2LNo license0MotorDriver
Thrcot
47.9 × 70 mm23 parts2LNo license0
How designs wire the TB67H450FNG,EL
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TB67H450FNG,EL connects to, and the resistors, capacitors and other passives placed on it.
- The VREF pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
- The VM pin has a decoupling capacitor on 3 of 5 designs, most often 100 µF (then 100 nF).
- The RS pin has a resistor to GND on 3 of 5 designs, most often 100 mΩ (then 20 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VREFpin 4 | Connected to: VREF_A 80% · a signal 20% |
|
| VMpin 5 | Connected to: VCC 100% |
|
| RSpin 7 | Connected to: Signal 60% · GND 40% |
|
| EPpin 9 | Connected to: GND 80% · not connected 20% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Motor42 by zhbi98, Motor35 by zhbi98, MD by MUNAKATA-EPC and MotorDriver by Thrcot.
The TB67H450FNG,EL in open source designs
The gallery holds 5 open source boards using the TB67H450FNG,EL from 5 GitHub repositories; a typical one measures about 42 × 42 mm and carries around 37 components.
60% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Motor42 by zhbi98.
Parts used alongside the TB67H450FNG,EL
Microcontrollers on boards using the TB67H450FNG,EL
What boards using the TB67H450FNG,EL are built for
TB67H450FNG,EL: common questions
Where can I find a TB67H450FNG,EL reference design?
Each of the 5 boards on this page is a real design using the TB67H450FNG,EL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TB67H450FNG,EL VREF pin?
The VREF pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TB67H450FNG,EL.
What decoupling capacitors do designs use on the TB67H450FNG,EL VM pin?
The VM pin has a decoupling capacitor on 3 of 5 designs, most often 100 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TB67H450FNG,EL.
What resistor goes on the TB67H450FNG,EL RS pin?
The RS pin has a resistor to GND on 3 of 5 designs, most often 100 mΩ (then 20 Ω). Counted from the KiCad layouts of 5 open source designs using the TB67H450FNG,EL.
What parts are used alongside the TB67H450FNG,EL?
The ME3116AM6G, MT6816, STM32F103CBTx, TJA1051T and XC6206P332MR appear in the most repositories here.
Which microcontrollers do boards using the TB67H450FNG,EL use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the TB67H450FNG,EL?
The median is 42 × 42 mm, and 60% are two-layer designs.
What is the most popular open source board using the TB67H450FNG,EL?
By GitHub stars, Motor42 by zhbi98, with 8 stars.
Can I simulate one of these boards using the TB67H450FNG,EL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.