Audiopicture

Vinset85·audiopicture·evidence/rev-ez/templates/kicad9-bus-pci.kicad_sch

This repository ships a schematic but no board layout.

About the Audiopicture PCB

Audiopicture is an open source ESP32 PCB design by Vinset85, published on GitHub. It is a board, with 30 components from 9 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the S5933_PQ160. By type, the board carries 12 capacitors, 5 resistors and 2 ICs.

It belongs with the audio, iot & wireless and sensors designs in this gallery.

From the project

Smart acoustic picture / complete Home Assistant room node.

Smart acoustic picture / complete Home Assistant room node.

Product authority: V2.2 Rev.E ultra-thin DML ≤ 30 mm. Footprint 320 × 400 mm. Body ≤ 30 mm. Dual specialized DML exciters on a composite bending-wave panel. Full room node retained: Ethernet, Wi-Fi, PoE, voice (4-mic + XVF3800), 60 GHz presence, temperature/humidity, illuminance, power telemetry, HA room software. Stereo and coverage from two or more pictures in the same room. Rev.D cone/PR 84 mm stack is withdrawn for the product.

Main components on the Audiopicture

Audiopicture bill of materials (BOM)

30 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1-N16R8
24C16
U1
1
S5933_PQ160
U11
1
BUSPCI_5V
BUS1
8
8x10K
RR1, RR2, RR3, RR4, RR5, RR6, RR7, RR8
2
TEST
W4, W5
8
100nF
C24, C25, C26, C27, C28, C29, C30, C31
4
4,7uF
C38, C67, C68, C69
3
10K
R5, R6, R7
2
2,2K
R28, R29

Audiopicture design files

The KiCad project lives in the Vinset85/audiopicture repository on GitHub; these links point at the commit this page was built from.

Audiopicture: common questions

What microcontroller does the Audiopicture use?

The Audiopicture is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.

How many components are on the Audiopicture?

30 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Audiopicture design files?

From the Vinset85/audiopicture repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.

Can I use the Audiopicture design in my own project?

The repository has no license, so all rights stay with Vinset85. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Audiopicture without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards